Swipe or use the arrows to view product images.
Hydrophobic IP 68 Adhesive Breathable Eptfe Acoustic Vent Membrane
| Price | $0.04 |
|---|---|
| Min Order | 5 Pieces |
| Availability | In Stock |
| Shipping From | Fujian, China |
| Popularity | 438 people viewed |
Membrane Type:
Vent Membrane
Type:
Gas-permeable membrane
Power:
Hydraulic
Custom Order:
OEM, ODM, Obm
Water Entry Pressure:
-120mbar(>1m)
Operation Temperature:
-40~125
IP Rate:
IP65/ IP66/IP67/ IP68/ IP69
Oil Rate:
6
Material:
Eptfe/Eptfe
Membrane Character:
Waterproof and Breathable
Thickness:
0.4mm
Trademark:
TMZC38065223D01T200308
Transport Package:
Plastic and Carton
Origin:
Fujian
Product Description
| Products | Medium gas volume, medium protection level | Trademark | Smart Membrane®-Vent | |||
| product name | BD 04100300 black | Product ID | DT | |||
| Product performance and features | ||||||
| Waterproof breathable product main function | Our products can provide excellent protection performance and durability in harsh environment | |||||
| \ | Test Standard | Characteristic value | Notes | |||
| IP grade | IC | IPX7 | IPX7 is a test area of1cm2,Problem 30 under 1.0 m water column minutes without wading | |||
| Water entry pressure, kPa | \ | ≥ 10 | The test area is:1cm2,The test time is 50sec | |||
| Typical air permeability mL/cm2/min@7kPa | Industry standards | ≤3000 | The test area is 1cm2 of the actual test air permeability | |||
| Operation Temperature | GB/T2423.1-2008 | Tmin = −40ºC ;Tmax = +120ºC | \ | |||
| Surface Properties | (AATCC)118-1989 | Hydrophobic | Oleophobic modification can be carried out according to practical application | |||
| Category | \ | (e-PTFE)∣non-woven fabrics | \ | |||
| Structure | \ | Laminating film: With backing material | \ | |||
| Thickness,mm | GB 6672-86 | 0.10±0.03 | \ | |||
| Application | Waterproof, breathable, filtered | |||||
| Function |
| |||||
Membrane Vents
through special stretching process, thousands of "nodes" and "fibers" are formed.
2.As its proprietary ePTFE microporous membranes allow air and gases to pass through freely, so moisture can diffuse before
condensation problems arising.
Customization: SPIDER Tech's protective vents can be customized to match your products in spec., color, property and we can provide you with specific solutions. For more information, please contact us freely.
Don't hesitate to contact us at anytime, no matter inquiry, TM message, via email or skype. If we are online,we will reply you at once. Even if sometime we are not online because of time difference, we promise you will be replied within 8 hours.
1) Use tweezers place the adhesive tape on the surface of the counterbore, and then press the patch against the mounting surfaceedge .
2) Press the rim after the adhesion for about 1.5s ;Don't make any move on the membrane after adhesion until 24 hours.
Attention:Ensure that the enclosure's mounting surfaces are smooth, clean and free from oils, particles or other contaminants;
Ensure that the enclosure's mounting surface is dry prior to vent installation.
Ensure that the enclosure's mounting surface is dry prior to vent installation.
What is SST-Porous Adhesive & BD GOO series Waterproof venting?
1.