Industrial Use Vertical Pulverized Coal Furnace

Product Description
 The main features of our product
1.the dust content ≤ 100 mg / m³,SO2 ≤ 250 ~ 300 mg / m³,NO2 ≤ 400 mg / m³;
2.slag-catch rate≥85%;
3.carbon content in the slag is about 1%;
4.the burn-off rate≥ 99%, carbon content in the slag is about 1%, Yellow-white slag;
5.removal efficiency ups to 99%;
6.the coal consumption can be reduced by 25~30% or more.
7.outside furnace slag discharging;
8.electromechanical integration;
9.pure flames with little ash.
 
Specific Description
1 Two series of products: removable vertical and horizontal pulverized coal burner. 
2 The flue gas dust and ash going to the main part of the boiler only accounted for 15%total combustion, most of which going into the dust collection system outside the furnace. 
3 Combustion effect is the same with that of oil and gas-combustion industrial boilers. 
4 A wider range for coal. We can use common bituminous coal, anthracite, brown coal and even the low quality coal.
5 Achieving PLC automatic thermal instrumentation control system:
6This product can use double materials-- pulverized coal and wood flour, as fuel, whose burn-off rate can reach 99% and the slag content can reduce to 2% ~ 3%. 
7 4T ~ 20T / H steam (hot water) boiler can cut out the chain of the chain-type boiler , bottom blowers, the gate of steel warehouse and coal feeder, and screw slag discharging. Thereby the weight and cost of the boiler has been greatly reduced. 
 
Product Applications:
It applies to 4T ~ 20T / H small and medium sized industrial steam (hot water) boiler, and other no-oil and no-gas industrial furnaces which not allow ash contamination.
It can provide qualified high temperature flue gas and high-temperature air flow andreducing the cost of industrial boilers.

Project pictures:

The product composition:
1.coal scraper conveyor series;
2.horizontal mill or energy-efficient fan-type mill series;
3.dual-swirl pulverized coal burner series;
4.secondary air fan series;
5.cyclone cylinder (horizontal or vertical) series;
6.slag discharging system;
7.automatic diesel ignition system;
8.the automatic control system of thermal instrumentation