Jlm Jeans Label Making Auto Leather Stamping Machine

AUTO LABEL PATCH MACHING MACHINE

Please before using this machine, you will read this instruction manual and the following matters needing attention and please strictly observe all the safety precautions listed, this can help you better safe production and maintenance of the unit.
1. please make sure the use of the power supply voltage: the company machine adopts three-phase five line ~ 380 v, 50 hz ac power, please be sure to match the local power supply voltage, please in strict accordance with the thread is plugged into a power supply
2. Do not share a power switch with other high-power appliances. This will cause voltage instability that will damage the original device or data inside the machine.
3. Do not spill the liquid inside the machine. When this happens, turn off the power immediately and do the processing.
4, please do not change the original configuration of standard power cord, this machine is used in the power cord is all through the national 3 c authentication of the power cord, for the sake of your safety and the mechanical equipment from being damaged, please use the original configuration standard power cord.
5, please do not open the case or unload the machine without authorization of the original device, please disconnect the power and open the case in this company permission or under the guidance of professional maintenance engineers with professional maintenance engineer, do not remove the

     TECHNICAL PARAMETERS
1, Power supply voltage: 380V power 5KW
2,Hydraulic pressure: 10-70mpa
3,Automatic bronzing function: the receiving speed can be adjusted automatically
4.  Easy to operate, directly input the data you want on the system, mechanical automatic completion of hot pressing, blanking 
5.  work efficiency is 8-10 times that of manual production
6.  High accuracy, automatic feeding, fast speed, the fastest can reach 0.2s/PCS 
7. Automatic constant temperature, intelligent temperature control
8. PLC + touch screen operation, servo system control leather transportation 
9, embossing, cutting pressure can be controlled,Precise positioning of embossing and cutting"
10. mechanical appearance volume is: L1400*D1000*H1700MM,
11.machine  weight is about 400KG.
12.Operating pressure: hydraulic 10-70mpa




Leather patch size:  min 10mm  *  10mm
                                max 100mm * 100 mm


TEMPERATURE : 380ºC