Js Polymer Waterproofing Coating Cement Based with Two Components Polymer Liquid & Cement with Special Additives

PU1A is a single-component self-leveling polyurethane waterproof coating with super elasticity and strength. Through chemical reaction after contact with moisture in the air, a tough, dense and seamless overall waterproof film is formed on the surface of the base course.
Main application:
1.Kitchen, toilet, balcony, roof and other common home outfit waterproof and dampproof.
2.Reservoir, water tower, water tank, swimming pool, bath pool, fountain pool, storage tank, sewage treatment pool, drainage and irrigation channels seepage and leakage prevention.
3.Used to prevent leakage and corrosion in well ventilated basement, underground tunnel and deep well.
4.All kinds of floor tiles, marble, wood asbestos, etc.

Product features:

1. No solvent, no tar, no pollution, tasteless environmental protection, no harm to construction personnel.
2.Lasting comprehensive waterproofing, highly effective impermeable and leakproof, moisture-proof and mildew proof, waterproof and sealed, bright color.
3.800% plus extended tear resistance, super adhesion with no cracking, full flexibility against displacement, super elasticity not afraid of settlement.
4.Oil resistance, acid and alkali resistance, puncture resistance, chemical corrosion resistance, deformation resistance.
5.Open cover and use, convenient repair, sprayable paint, outside appearances last longer.

Theoretical paint consumption:
When the coating thickness is 1.0mm, the coating is about 1.3 kg per square meter. 
Technical parameters and curing properties PU1A
appearance White, blue, black, gray, custom color, self-leveling
Density (g/cm3) 1.35±0.1
surface drying time (h) 8
Tensile strength (Mpa) >2
Curing speed (mm/24h) 3-5
Elongation at break % >800
Solid content % >94
Construction temperature ºC 5-35ºC
Service temperature ºC -40 +80ºC
Shelf life (month) 12