Menu
Global B2B sourcing platform
Verified suppliers and manufacturers

L58CZ1 220V-240V 50Hz R134A Refrigerator Compressor 1/6HP

Price $25.00
Min Order 100 Pieces
Availability In Stock
Shipping From Zhejiang, China
Popularity 590 people viewed
Model NO.:
L58CZ1
After-sales Service:
Available
Warranty:
Available
Lubrication Style:
Lubricated
Cooling System:
Air Cooling
Cylinder Arrangement:
Balanced Opposed Arrangement
Cylinder Position:
Horizontal
Structure Type:
Closed Type
Compress Level:
Single-Stage
Refrigerant Type:
Freon
Back Pressure:
Lbp
Motor Type:
Rsir
Power:
220-240V, 50Hz
Refrigerant:
R134A
Input Power:
120W
Cooling Capacity:
150W
Cop:
1.3W/W
Application:
Refrigerators, Freezers(200L~260L)
Weight:
7.8±0.4kg
Displacement:
5.8cm3
Trademark:
Donper
Transport Package:
Carton with Wooden Packing
Origin:
China
HS Code:
8415909000
Product Description

Product Parameters

Model No.L58CZ1Power220~240V/50Hz
Cooling Capacity150WInput Power120W
Displacement5.8cm3RefrigerantR134A
Motor TypeRSIRCOP1.3W/W
Weight7.8±0.4kgWorking Current 0.85A
ApplicationRefrigerator,Chest Freezer (200L~260L)

Detailed Photos

Dimension Figure

General Requirement

(1)After removing the rubber plug, the compressor must be assembled with 15 mins, to avoid dirt and moisture entering.
(2)When the compressor is sotred ,transported installed, it shall not be tilted or turned upside down to avoid collision.
(3)When the compressor is working, it should be placed horizontally with the ground.The inclination angle of the compressor should not be more than 5°.
(4)The compressor is filled with the optimum amount of refrigeration oil approved by Donper. Do not piur out, add or change oil at will.
(5)To ensure the system pressure balance, the compressor running time should be less than 4 mins.
(6)Compressor can not withstand high voltage or start, operation in Vaccum condition, it cannot be used to vacuum the system.
(7)When the refrigeration system is designed, the oil return of the system should be fully considered.
(8)The working ambient temperature of normal compressor should be no more than 43ºC. When the compressor is continuously running at the highest room temperature, the condensing pressure and highest in peak pressure should not exceed the following table value(for special adaptive environment, we need to be told in advance before model selection)

(9)Compressor sholud be sored in the area with protection against rain and snow, moisture, and sun.
(10)Compressor accessories (such as PTC. OLP, capacitor etc.)are not assembled with compressor when delivered, but inside the compressor accessories box.
(11)If you have any requests, please contact us in time, in order to better serve you.
  • Similar Products
Full Page Contact Supplier