Menu
Global B2B sourcing platform
Verified suppliers and manufacturers

LED Backup Light, LED Emergency Surface Light

Price $13.00
Min Order 500 Pieces
Availability In Stock
Shipping From Zhejiang, China
Popularity 400 people viewed
Model NO.:
LEK03-6NC
Usage:
Emergency Light
Emergency Time:
3-4h
Installation:
Surface
Color Temperature:
Cool White
IP Rating:
IP20
Operation Mode:
Non-maintained
Battery Type:
Ni-Cd Battery
Emitting Color:
Cool White
Material:
Aluminum
Certification:
CE, RoHS, CB
Warranty:
4 Years
Lumen:
150lm
Charge Time:
24hrs
Emergency Brightness Efficiency:
90-95%
Trademark:
flolite
Transport Package:
Color Box
Specification:
140*125mm
Origin:
China
HS Code:
8504401400
Product Description
CB Approved 2x3W LED Emergency light with Ni-Cd batteries 3Hours Backup

Relevant Standard

EN 60598-1

EN 61000-3-2

IEC 60598-1

IEC61000-3-2

EN 60598-2-22

EN 61000-3-3

IEC 60598-2-22

IEC 61000-3-3

EN 61347-1

EN 62471

IEC 61347-1

IEC 62471

EN 61347-2-13

EN 62493

IEC 61347-2-13

IEC 62493

EN 61347-2-7

EN 55015

IEC 61347-2-7

IEC 55015

EN 62778

EN62031

IEC 62778

IEC62031


Product Parameter

Model No. :

LEK03-6NC

Battery:

Ni-Cd, 3.6V 2000mAh

LED Chips:

Cree xt-e

Luminous Flux:

150lm

 

Power Consumption:

2x3W

Input Voltage:

AC220-240V~50/60Hz

Charge time:

24Hours

Emergency duration:

3Hours

ta:

0~35ºC

Max. Case Temp.:

70ºC

Protection Class:

II

IP Rating:

IP20

Power factor:

0.5

Supply current:

0.04A

Operation:

Maintained or Non-maintained

Function:

MANUAL test

Light distribution:

Path way (Standard)

  
 

Door way (Optional)

  

 

Maintained and Non-Maintained Function

 ∷  Maintained: Assemble wire connector

∷  Non-Maintained: Disassemble the wire connector


Photometrics

                      LEK03 Narrow Lens(Path Way)                                                          LEK03 Wide Lens(Door Way)

Dimension


Installation Diagram

                                   Wire preparation:

                                  0.5~1.5mm²

Special Note

∷ This product should be installed by a registered electrician in accordance with local standard and electrical regulations.

∷ Take care to ensure the mains supply is isolated before installation, Check the unit label for correct supply voltage and frequency.

∷ The whole luminaire should be replaced when they no longer meet their rated duration of operation after the corresponding recharge period. 

∷∷ Normal Operation: The green indicator light on the bottom unit stays on. The LED will go out if the mains supply fails, if the internal charger is malfunctions, or if the unit is in test mode. The fixture must be charge 24 hours after installation.

∷∷ Battery: The battery is not replaceable; When battery no longer meet its rated duration of operation, after corresponding recharge period, the whole luminaire shall be replaced.

∷∷ LED: The light source of this luminaire is not replaceable; when the light source reaches its end of life, the whole luminaire shall be replaced;

∷∷ Test Switch: If pressed the test switch, LED indicator will go out and the fixture will operate from its battery supply.

∷∷ Auto Self Testing: Every 7 days for function tests and every 26 weeks for duration tests.

  • Similar Products
Full Page Contact Supplier