Lightweight Wall Panel Precast Concrete Partition Wall Panel Precast Walls Prices Sandwich Panel Building/Kenya Precast Lightweight Concrete Thermal Wall Panels

Precast Concrete Partition Wall Panel Precast Walls Prices Sandwich Panel Building/Kenya precast lightweight concrete thermal wall panels

Product introduce of  sendwich panels

The ZJT lightweight energy-saving sandwich panel is prepared by taking polyphenyl particle mortar as a core material, using a calcium silicate plate as a surface layer material, and appropriately mixing the fly ash, the slag and the admixture. 




Product specification of  bulding materials
 


Advantages

1, Energy Saving,green eco-friendly
 
ZJT eps cement solid panel uses the environmental protection material with freeze-resistant and heat-preservation. It has good heat insulation and heat preservation function. It can automatically adjust the air moisture content with the seasonal climate change, meet the development Trend of Modern Ecological Residential Buildings.
 
2,Waterproof,fireproof
 
ZJT eps cement solid panel have a fire proof limit of 4 hours against a high temperature of 1000ºCand incombustibility standard achieve national level A , and the material does not emit any toxic gases, fully compound the international environmental standards.
 
Zhongjingtai  eps cement solid panel can be made as container to fill water without plastering , no slightest leakage.
 
3, Sound insulation and absorptions
ZJT eps cement solid panel has a good sound insulation and sound-absorbing features, DQ 90mm thick plate has a sound insulation volume of 45dB, the traditional block has a sound insulation volume of 20dB.
 
4,Light weight,space saving,coast saving
 
ZJT light weight partition board is a solid core of the new wall materials, lightweight materials, greatly reducing the load-bearing construction. Its  thickness between 60mm-180mm, compared with the traditional block thickness greatly saves the building space. For example: the traditional block to increase the average thickness of 240 mm +40 mm, while use 90mm thick DQ light weight wall board as interior wall can meet all needs and meet the national standards for testing.
 
5,Easy construction and shorter time 
ZJT eps cement solid panel construction for the assembly of construction, the entire assembly or construction process is simple, efficient, non-construction waste, without touching ash, shorten the duration. Traditional block wall requires 12 people 60 minutes of construction ,DQ light weight partition board only takes 3 people 60 minutes to complete, save a lot of labor costs for construction.
 
 
    6, High strength earthquake safety performance is high
   ZJT eps cement solid panel take prefabricated construction, the overall high strength, the seismic performance is higher than the masonry wall several times, the impact resistance is several times the other masonry, in 50kg impact force, no The slightest through the crack, the overall deformation, strong surface without loose traces; up to the right light partition board can be directly nailed or on the expansion bolt hook hanging heavy objects, such as air conditioners

Product application of Sound Insulated Eps Cement Sandwich Panel









Product Features of lightweight partition wall panel

Heat Insulation: Adjust the indoor temperature at a constant range.
Fire Proof: 5mm calcium silicate board is fireproof, Eps Cement sandwich panel can be against high temperature for 4 hours.
Water Proof: Experiment has proved that water pool can be made by Eps cement sandwich panel without absorbing any water and no leakage at all after one year.
Sound Insulation: The inside of wall panel material (EPS polystyrene grain) has fine sound insulation and sound absorbing function.
Easy to Install: Using our installation material (PU foam and Cement Adhesive) is easy to build house.
Labor Cost Saving: As wall panel is easy and fast to construct, the labors can be cut down in the same work and time.
High Intension: Eps Cement sandwich wall panel can be nailed directly or hang heavies, it can be decorated by ceramic tile, wall paper and any decorations you like.
Earthquake Resistance: The quake proof performance of Eps cement sandwich wall panel is more than 7.5.
Space and cost Saving: 60 to 150mm,which is more thinner than the traditional block, so it can save a lot of construction space. Meanwhile, the construct cost can also be saved instead of using the traditional blocks.
 
Product packing and shipping of prefab wall
1.Free packing (with normal pallet and packing belt) 2.Standard exporting packing (wrapped with plastic thin film,edge protect and good pallet): USD20-30/Package 3.Packing size: 1500-3000*610*1000mm Loading: 18 pallets per 20' container, 11000kgs-18000kgs per 20' container.






About us

Xiamen ZhongJingtai building materials Co., Ltd, is a professional high-tech research and development company producing new wall materials, machinery and equipment development, technology production and promotion of product applications. The company is situated in the charming Xiamen city, with the convenience of water and land transportation and only ten minutes from the airport. We respond positively to the national policy on wall reforming. We have developed successfully wall panels that meet the energy saving needs of modern architecture.



export more than one million per year  all over the world


Contact us

Xiamen Zhongjingtai Building Materials Co., Ltd 
Unit2A, Lianchang Building, No6-8 Huli District, Xiamen, China
Contact person:zoe zeng
 +8618559217326
lightweight concrete thermal wall panels
lightweight concrete thermal wall panels

 Lightweight Wall Panel
Lightweight Wall Panel
Lightweight Wall Panel

Sandwich Panels
Sandwich Panels
Sandwich Panels