Menu
Suppliers Products
Global B2B sourcing platform
Verified suppliers and manufacturers
MadeInChina.com > Products > Manufacturing & Processing Machinery > Mixing Equipment > Mixing Tank
Swipe or use the arrows to view product images.

Lithium Battery Equipment Intelligent Equipment 300L Double-Layer Flat Bottom Dissolution Tank

Price $3200.00
Min Order 1 Set
Availability In Stock
Shipping From Guangdong, China
Popularity 516 people viewed
Send Inquiry View Full Page
Model NO.:
KR-R-300L
Additional Capabilities:
Vacuum, Mixing
Application:
Liquid, Liquid with Suspended Solids, Powder, Viscous Fluid
Application Area:
Agricultural Chemicals, Chemical, Daily Chemical, Engineering & Construction, Food, Metallurgy&Mineral, Pharmaceutical, Lithium Battery
Certification:
CE, ISO
Condition:
New
Cooling Method:
Water Cooling
Heating Method:
Hot Water Heating
Insulation Material:
Water Circulation
Main Material:
Stainless Steel
Mixing Capacity:
100L
Mixing Drum Shape:
Drum
Stirring Type:
Spiral
Warranty:
1 year
Working:
High Speed Mixer
Tank Specification:
Internal Diameter φ700mm Depth 400mm
Design Capacity:
369L
Efficient Usage Capacity:
300L
Mixing Paddle Speed:
0-40 Rpm,Vvvf
Disperse Disk Speed:
0-1400 Rpm, Vvvf
Mixing Power:
4 Kw
Dispersing Power:
2.2 Kw(Two Groups 3kw)
Weight:
About 0.9 Ton
Viscosity:
Less Than 100kcps
Applicable Solvent:
NMP, Deionized Water, etc
Applicable Additive:
SBR,Cnt,etc.
Applicable Powder:
PVDF,CMC
Failure Rate:
Less Than 2%
Bearing Temperature:
Customer Is Required to Provide Circulating Hot an
Customized:
Acceptable
Trademark:
Career
Transport Package:
Card Board
Specification:
1100mmx1080mm x 1860 mm(L x W x H)
Origin:
China
HS Code:
8479820090
Product Description
Product Description

Main configuration 
 

No.ItemConfiguration
1Equipment appearanceA3 Paint,International warm grey color 1C
2Three phase asynchronous VFD Standard configuration
3Motor VVVFStandard configuration
4Lift mechanismOptional
5Upper and lower liquid level detectionOptional
Note: If there are special requirements or additional/reduced items (such as adding/reducing pipe openings), please provide additional explanations. The main switch power cord of the equipment inlet box and the hot and cold water pipes connected to the mixing tank interface can be prepared by the customer themselves.
Product Parameters

Working principle and relevant parameters
 

Usage This model is mainly suitable for pre mixing solvents such as PVDF and NMP
Working principleThe power on signal is given through the control panel, and the mixing head of the premix tank is operated at the set speed. The mixing head of the premix tank is composed of a transmission part connected by three sets of motors on the barrel cover, which drives a set of low-speed mixing blades under the barrel cover and two sets of high-speed dispersers to operate. The mixing paddles and dispersers rotate independently in the mixing tank, and the mixing and power are driven by different motors, which can achieve independent stepless speed regulation.
Equipment CompositionTransmission part, sealed container, control system, etc
External dimension1100mmx1080mm x 1860 mm(L x W x H)
Tank specificationInternal diameter φ700mm  depth 400mm
Design capacity265L
Efficient usage capacity 200L
Mixing paddle speed0-40 rpm, VVVF
Disperse disk speed0-1400 rpm, VVVF
Mixing power 4 KW
Dispersing power2.2 KW (Two groups 3KW)
WeightAbout 0.85 ton

Equipment capacity 
Item Capacity
Applicable viscosityViscosity ≤100Kcps
Applicable solventNMP, deionized water, etc
Applicable additiveSBR,CNT,etc.
Applicable powderPVDF,CMC
Failure rate≤2%,
Bearing temperature7ºC~80ºC,Customer is required to provide circulating hot and cold water
Measuring accuracy ±2ºC,Customer is required to provide circulating hot and cold water
Inner barrel pressure resistanceLong term water pressure ≤ 0.3Mpa, no deformation or leakage phenomenon
Not applicableAcetone solvent

Other optional models 

Detailed Photos

After Sales Service

 

FAQ
  1. If I place an order, what is the usual delivery time?                                                                                                                               -About 45-60 days
  2. How do you meet my needs.You need to tell us your production capacity, mixing materials, and the remaining requirements mentioned in particular. We will provide you with a solution based on your needs. At the same time, we will establish a dedicated production technology engineering communication and discussion group to ensure worry free throughout the process.
  3. Can you provide on-site installation and debugging services?
    Yes, our company can send engineers to your local workshop to guide installation and commissioning, provide training, and accompany production.     
  • Similar Products
Full Page Contact Supplier
↑