Swipe or use the arrows to view product images.
Lithium Copper Composite Belt Current Collector Anode Foils for Lithium Solid-State Batteries
| Price | $100000.00 |
|---|---|
| Min Order | 1 barrel |
| Availability | In Stock |
| Shipping From | Fujian, China |
| Popularity | 370 people viewed |
Model NO.:
T-Li-Cu-foil
Negative Materials:
Lithium Copper Composite Belt
Type:
Lithium Copper Composite Belt
Purity:
Li More Than 99.9%
Trademark:
TOB
Transport Package:
Carboard Boxes
Specification:
0.01*100mm
Origin:
China
Product Description
Lithium Copper Composite Belt Current Collector Anode Foils For Lithium Solid-State Batteries
The lithium copper foil is made of conventional copper foil and lithium metal belt after composite welding, which can be coated with lithium on one side or both sides.
Appearance
Lithium strip surface flat, bright, no oil spots, no perforation and tear.
No visible oxides and nitrides.
There should be no wrinkles, holes, cracks, creases, pressing lines and other defects.
The edges of the lithium copper foil should be neat and without cracks.
The lithium copper foil shall not have delamination and inclusion.
Cleanliness : Lithium foil is uniformly silver colored.
| Chemical analysis | |||||||||||
| Li Content ration % min | Content ration % max | ||||||||||
| Li | Na | K | Ca | Fe | N | Si | Cl | Al | Ni | Cu | Mg |
| 99.9 | 0.02 | 0.005 | 0.02 | 0.005 | 0.02 | 0.008 | 0.006 | 0.005 | 0.003 | 0.004 | 0.01 |
Single side lithium coated
| Li foil thickness (mm) | 0.021mm |
| Copper foil thickness (mm) | 0.01mm |
| The thickness of Li and Cu (mm)(after attached) | 0.031mm |
| Li foil width (mm) | 80.09mm |
| Cu foil width (mm) | 100 mm |
| the distance between lithium foil left edge to copper foil left edge (mm) | 10.0±1.0 mm |
| the distance between lithium foil right edge to copper foil right edge (mm) | 10.0±1.0 mm |
Double side lithium coated
| Li foil thickness (mm) | 0.021~0.022 mm |
| Cu foil thickness (mm) | 0.010 mm |
| Li foil thickness (mm) | 0.021~0.022 mm |
| the thickness of Li, Cu and Li (mm) (after attached) | 0.053~0.054 mm |
| Li foil width (mm) | 80.11 mm |
| Cu foil width (mm) | 100.00 mm |
| the distance between lithium foil left edge to copper foil left edge (mm) | 10.0±1mm |
| the distance between lithium foil right edge to copper foil right edge (mm) | 10.0±1mm |
Packaging:
In the drying room, the product is wound on a reel, placed in an aluminized polyester pouches that has been dried for more than 24H, and filled with dry argon with a content of 99.999%.
The outer packaging is steel drum.
Safety/Storage:
During the transportation of the product, it should be fireproof and moisture-proof, no violent collision, and the drums should not be rolled on the ground.
The product should be stored in a rainproof, clean, dry, non-corrosive and a well-ventilated environment. It is strictly forbidden to store in the open air.
- Similar Products
$1000.00
100 Square Meters (MOQ)
Eptfe for Proton Exchange Membrane of Hydrogen Fuel Cell Energy Battery Separator
Hangzhou Wetrue New Material Co., Ltd
$25.00
100 Pieces (MOQ)
Battery Equalizer for Lead-Acid Battery of Forklift
TIANJIN CHINWAY IMPORT AND EXPORT COMPANY LIMITED
$1000.00
100 Square Meters (MOQ)
0.22um Eptfe for Proton Exchange Membrane of Hydrogen Fuel Cell Energy Battery Separator
Hangzhou Wetrue New Material Co., Ltd