Swipe or use the arrows to view product images.
Low Temperature Engine Start Spray Visbella
| Price | $2.58 |
|---|---|
| Min Order | 5000 Pieces |
| Availability | In Stock |
| Shipping From | Zhejiang, China |
| Popularity | 385 people viewed |
Model NO.:
STA0450C
Type:
Transmission Jacks
Standard:
Standard
Certification:
ISO, CE, GS, RoHS
Tire Gauges Type:
Tire Pressure Gauge
Tire Gauges Carry Way:
Embedded
Condition:
New
Update Method:
by Internet
OEM:
Welcome
Lifespan:
12 Months
Trademark:
VISBELLA
Transport Package:
12PCS/CTN
Specification:
27.5*21.5*20.5cm
Origin:
Zhejiang, China
HS Code:
3506990000
Product Description
Visbella® Starting Fluid is approved for use in gasoline and diesel engines in autos, trucks, motorcycles, marine outboard motors, lawn and garden equipment, construction equipment and more. Economical fluid provides "trigger fast" starts in average cold weather conditions.1. Effective at temperature as low as -65ºF2. Prolongs battery and starter life and reduce engine wear3. Lubricates upper cylinders and protects against rust
Application:
Hold can in an upright position. With engine off, spray once or twice into air intake system (air cleaner, carburetor or intake manifold). Crank engine and, if necessary, continue to spray while engine is being turned over until it begins to run smoothly. Do not flood engine before using. Do not use with glow plugs.
Handling Precautions:
1. Do not puncture, incinerate or store can above 120ºF. Exposure to high temperature may cause can to burst.
2. Do not place in direct sunlight or near heat sources. Product is flammable and should be kept from all flames and other ignition sources.
3. Progressively higher exposure to vapor may cause eye and skin irritation, headaches, nausea, dizziness.
4. Use with adequate ventilation, open doors and windows or use other means to ensure a fresh air supply during use. Avoid continuous breathing of vapor and spray mist, avoid contact with skin and eyes.
5. Keep away from children.
Production Line
Company Overview
Zhejiang Guoneng Technology Co., Ltd was establish from 1992. Over 20 years professional manufacture experience, we become one of the largest Manufacture on Adhesive in Huzhou City Zhejiang China.
Our company covers an area of 22,000 square meters, including 800 square meters of laboratory and we have over 200 employees. We specialize in the production and distribution of adhesive products,and they're well approved by SGS, Reach, RoHs, BSCI, ISO9001:2000 etc. OEM and ODM are both welcomed.
We'd like to cooperate with customers from all over the world based on mutual-benefit. We always put "Customers First" in our mind and commit ourselves to providing high quality HPPP (Honest, Prompt, Precise, Professional) service to all reliable and esteemed international partners and clients.
Certificates
After-Sales Service
Reply within 24 Hours
Professional consultation service is available within 24 hours after receiving your feedback regarding theiterms
that that you bought.
Global Insurance Service
Global insurance service guarantees the safety of iterms when installation and application.
Compensation Policy
Any quality problem caused by our company side with enough evidence, we promise you that if could bere-produced for free.
Contact us, you will get more than what you see !
- Similar Products
Negotiable
100 Sets (MOQ)
Isuzu Diesel Fuel Filter Wrench (11T) (MG50456)
Ningbo Magma Tooling Co., Ltd.
$34.00
100 Pieces (MOQ)
Portable1500lb Mini Electric Winch with Remote Control
Ningbo Chima Winch Co., Ltd.
$1.20
100 Pieces (MOQ)
Wholesale OEM Customized Car Tire Repair Tools
Anshan Jinshancheng Rubber Products Co., Ltd.