Luxury Vinyl/Spc Waterproof Fireproof UV Coating 7*48inch Rigid Core PVC Lvt Flooring for Home Decoration

1)Waterproof and Dampproof 

As the main component of SPC is stone powder, so it performs well with water, and mildew will not happen with high humidity.

2)Fire Retardant 

According to the authorities, 95% of the victims were burned in the fire caused by the toxic fumes and gases. The fire rating of SPC flooring is NFPA CLASS B. Flame retardant, not spontaneous combustion, leave the flame automatic out in 5 seconds, won't produce toxic of harmful gases.

3)No Formaldehyde 

SPC is high quality stone power & PVC resin, without harmful material such as benzene, formaldehyde, heavy metal.

4)No Heavy Metal, No Lead Salt

The Stabilizer of SPC is Calcium zinc, no lead salt heavy metal.

5) Dimensionally Stable 

Exposed to 80° heat, 6 hours---Shrinkage ≤ 0.1%; Curling ≤ 0.2mm

6) High Abrasion 

SPC flooring has a transparent wear-resisting layer, whose revolution is up and higher than 10000 turns.

7) Superfine Anti-sliping 

SPC flooring has special skid resistance and wear-resisting layer of the floor. Compared with common floor,SPC flooring has higher friction when it's wet.

8) Low requirement of subfloor 

Compared to traditional LVT, SPC flooring has a distinct advantage because it is rigid core, which can hide many imperfections of subfloor.


Jobsite Photos

Q1: Do you offer free sample?

A1: Yes, free samples are available.

Q2: What is your lead time?

A2: Within 15 days after we get the prepayment.

Q3: What is your payment terms?

A3: 30% deposit and 70% upon the copy of B/L.

Q4: How do I properly clean and maintain my SPC flooring?

A4: To clean dirt that won't come up with a sweep or vacuum, use a non-rinsing cleaner that
leaves no film and a mop. Never use an abrasive cleaner, oil cleaner, or dish detergent.

Q5: Can I walk on my SPC floor and mop it immediately after installation?

A5: It is not recommended that you walk on your SPC floor after installation for at least 24
hours. You can mop your floor immediately after installation.

Q6: How do I repair a chip or scratch in my vinyl flooring?

A6: Chips and deep scratches in SPC generally cannot be removed, but can be hidden or
concealed. To remove scuff marks try rubbing a drop of mineral spirits, turpentine, paint
thinner, or baby oil over the mark. Then wipe the scuff away with a soft cloth. Be sure to
wipe the SPC floor thoroughly with a damp cloth afterwards, as these solutions can leave.