Lxsm-W2 DN50 Ultrasonic Water Meter

LXSM-W2 Ultrasonic Water Meter 

1. The ultrasonic water meter is used to record the total amount of cold water flowing through the tap water pipeline
2. In term of pipe diameter structure, only the transducer assembly is attached to the pipe wall,there is no obstruction in the direction of water flow, no moving parts are worn,and the anti-blocking property is stronger;
3. The start-up flow is low,which helps the Department of Water Resources to monitor the status of the pipeline network and more effectively respond to the national water conservation plan;
4. The pressure loss is small ,reducing the energy consumption of the water department.
5. Small size,light weight ,convenient for storage and transportation,covenient for construction and installation,and the installation angle can be adjusted according to the actual installation environment on site.
6. Low water quality requirements.
7. With electronic lead sealing function,it is convenient to track and maintain;
8. Under-voltage and power saving design,the meter will turn on the power saving mode under empty pipe or long-term storage of measurement data;
9. Adopting intelligent power saving design,the meter will turn on the power saving mode under empty pipe or long-term fluid static state,and the water meter will not measure.
10. Provide a software upgradeplatform,upgrade internal firmware,do not affect all the data in the early stage,and facilitate after-sales maintenance;
11. Record 36-month forward/reverse cumulative flow,100-day flow daily settlement,and data saved regularly.

Dimensions and weight