Swipe or use the arrows to view product images.
Maller Microwave Waste Tyre Plastic Pyrolysis Machine
| Price | $25000.00 |
|---|---|
| Min Order | 1 Set |
| Availability | In Stock |
| Shipping From | Shandong, China |
| Popularity | 443 people viewed |
Model NO.:
XFLJ-1
After-sales Service:
Whole Life After Sales Service
Warranty:
2 Years Since The Delivery Time
Condition:
New
Certification:
ISO, CE
Automation:
Automatic
Screw:
Rotate Type
Treatment:
Pyrolysis
Material:
Q345r
Working Time:
24/7
Labor Request:
2people Per Shift
Power Consumption:
90kw/Hr
Fuel Consumption:
0
Oil Output Ratio:
More Than 50%
Water Consumption:
50kg/Day
Control Mode:
PLC
Install Size:
50*20*8m
Shipping Size:
5*2.1*2.1m
Container No.:
1 X 20"Gp
Installation Period:
1 Month
Engineering Cost:
Free
Plate Thickness:
16mm
Heating Mode:
Hot Air
Trademark:
xingfu
Transport Package:
Sea Worthy Package
Specification:
15t/day
Origin:
China
HS Code:
84174090
Product Description
Performance Feature
Outer rotatory pyrolysis. No coking.
Adopt multilevel cooling design, to get more fuel oil.
Hot air heat, cooperated with low temperature pyrolysis catalyst, extend working life of plant.
Enclosed production all the way, no leakage and no dust loss, environmental protection.
Exhaust gas multistage processed, gas discharge reach European Standard level
Technological Process
Waste plastic,medical waste and household waste sent into fuel preheater by conveyor to melt. Process generated HCL specially.
Melted fuel continuously sent into reactor and finish pyrolysis under low pressured catalyst.
After generated gas during pyrolysis separates in gas-liquid separator, liquify in condenser and get fuel oil. After fixed bed second catalyst and dewaxing,can get the fuel oil with high quality.
Carbon residue after pyrolysis output continuously by cooling conveyor,and made to be carbon rod as fuel.
Flammable gas goes into exhaust gas treatment tank to desulfur,then extracted by vacuum pump and enter into water sealed tank, sent to hot air stove to burn.
Main Performance Parameter
Item | Type | XFLJ-1 | XFLJ-2 |
Capacity/24h | 1T | 2T | |
Working temp. | ≤650ºC | ||
Fuel | Fuel oil, natural gas, liquified gas | ||
Heating way | Direct heaing | ||
Fuel request | Waste plastic, medical waste and household waste | ||
Working pressure | Normal pressure | ||
Inflaming retarding way | Nitrogen blowing | ||
Consumption | 20 kg | 40 kg | |
Size | 3500 × 1600 × 2100(mm) | 4500 × 2000 × 2300(mm)×2 | |
Total power | 9 kw | 15 kw | |
Power consumption | 5 kw/h | 8 kw/h | |
Floor space | 4000 mm × 3000 mm | 5000 mm × 3500 mm | |
Highest point of installation | 3500 mm | 3700 mm | |
Remark:This parameter is just for reference. Size change caused by design improvement will not inform customers specially. Please refer to documents enclosed with products.
Product Recovery Rate
Fuel oil: 50-55%
Carbon residue: 30-35%
Steel wire:10-15%
Syn gas: 8-10%
Fabrication Procedure
Project display
Certificate
- Similar Products
$5000000.00
1 Piece (MOQ)
Reliable Hazardous Waste Rotary Kiln Incinerator
Jiangsu Wanxin Environmental Technology Co., Ltd.