Manual Fire Alarm Push Button Red Fire Alarm Break Glass

1.Manual call point breif introduction:

It can be send conflagration signal to controller who can use conflagration equipment of message in directly.The break glass,fire alarm button,is one of button which be installed public place peole exit and entrance.If you press down this button or break the glass,one signal will be input to fire control panel.It is one of button more emergency than smoke of heat detector,without confirmation will be alarm and connection the fire center.

2.Manual call point main specification:

Parts: plastic shell,glass,key,screw.
Other information:
A. Rated voltage: 12/24VDC/220VAC optional
B. Max.working current: 5A
C. SPL(db/1m): 103
D. Working humidity:MIN 95 RH%(25C)
E. Working temperature:: -10 C - 55C

1.Fire alarm button main technical parameters:

1.G.W/CTN.: 10KG
2.PACKING SIZE:47*28.5*20.5CM 0.0275CBM/CTN 50PCS/CTN
3.PARTS:PLASTIC SHELL,KEY,SCREW.
4.OTHER INFORMATION:
a.RATED VOLTAGE:12/24VDC/220VAC OPTIONAL
b.MAX.WORKING CURRENT:5A
c.SPL(db/1m):103
d.WORKING HUMIDITY:MIN 95 RH%(25C)
e.WORKING TEMPERATURE:-10 C-55C
f.MANUAL CALL POINT W/ALARM DESIGN

2.Fire alarm button features:

1.Easy installation and maintenance
2.Operated by finger Pressure
3.Resettable Operating Elements