Manufacturer for Steel Plants with ISO Certificate

High Speed Wire Rod Mill No Twist Finishing Mill

This top crossing 45 ° high-speed wire rod finishing mill is arranged in the high-speed wire rod production workshop. Through the continuous micro tension rolling of the 10 stands of finishing mills, the rolled pieces of Ø 17 ~ Ø 37mm conveyed by the upstream mill are rolled into finished wires of Ø5.5 ~ Ø22mm. The maximum operating speed is 120m/s,and the guaranteed outlet speed of the unit is 105m/s.

MODULE MILL advantages:

1.Speed up, increase production:When rolling Φ6, normal roll speed is 75m/s, one hour production is 57t, used module mill, speed increase to105m/s, one hour production is 78.76t. 

2.Reduced alloy composition:Production of fine grain rebar, billet cost decreased 80/t

3.Shorter time to change the roll:Shorter time to change the roll, annual production increased 2,880,000t.

4.Reduce equipment storage:Only one bevel gear box is needed as a reserve, can reduce 4, at $2 million per unit, the reserve can be reduced by $8 million

5.Motor:Main motor power in DC motor reasonable power range, can choose DC transmission scheme, saving investment of RMB 3 million.

6.Energy Saving:According to the field test, the empty power consumption of each mill is as high as 100kw. According to the production of four empty mills, the annual waste of electricity is as high as 2.24 million KWH (7000*8*400=2240000), and the electricity cost is 1.344 million yuan (224000*0.6=1244000).

7.Less Spare Parts:The inventory of roller rings, guide guards and other technological parts shall be reduced by more than 4 million yuan.

Technical Parameters: