Multi-Function Electrosurgical Unit for Surgical

Medical equipment, Multi-function high frequency electrosurgical unit H900
1) The unit is controlled by Micro-Computer and provides mono-polar and bi-polar output. The shows are digital display for output. It sounds with different frequency and light glimmered, when the output is being given.
Double function foot switch (mono and bi-polar), with yellow pedal cutting and blue pedal coagulation. Hand switch mode when button-activated probes are connected. Return circuit sensing monitors and deactivates generator in case patient plate fails. Front panel allows control of: Power cutting, power coagulation, on/off. Display reports: Output power, system errors and electrode failure.
For the unit, the range of output is wide, the speed of cut is fast, the effect for coagulation blood is good, the characteristic is stable and reliable. It has pure cut, two blend cuts. Contact coag, standard coag, spray coag, and bipolar coag. The unit may be used in various operations extensively and get ideal effect of the operation.

2) Technical data:
Working frequency: 512kHz ± 5%
Modulated frequency: 20kHz ± 5%
Ground leakage current: Less than 0.5mA
Patient leakage current: Less than 0.01mA
Power supply: 220 ± 22V, 50Hz
Output frequency: 512kHz
Max output power, mono-polar: 400 W (cutting), 200 W (coagulation)
Max output power, bi-polar: 70 W (coagulation)
Category: Type I, kind CF
Power consumption: 300W
Dimensions: 41.3× 40× 16.5cm
Weight: 14kg
Can be supplied on a sturdy mobile trolley with lockable casters.