Multi-Purpose Rust Remover Rust Proofing Silicone Lubricant Oil Mould Release Agent Spray

Silicone Spray (Mould Releaser)

FEATURE:
 

² EXCELLENT MOULD-RELEASING EFFECT

² KEEP LUBRICATING

This product can be applied in temperature between 60°C~150°C, for mould-releasing such as plastics and rubber industries, metallic casting mould, which forms the resisting film to prevent body adhesion, and not corrodes the body surface. It also has excellent anti-rust effect and powerful lubricating function, which can be widely applied to mechanism, precision parts and metal products.

DIRECTIONS:

1. Remove any water, dirt, grease and so on.
2. Shake the can well before use.
3. Hold the can 15-20 cm away from surface to be sprayed.
4. If spray too much, wipe off with soft clean cloth.

PRECAUTIONS:

1. Keep away from heat, flame, spark and other source of ignition.

2. Store in a cool, dry place (45°C); Avoid direct sunlight.

3. Do not clash, puncture, or incinerate the can.

4. Keep out of reach of children;