Menu
Suppliers Products
Global B2B sourcing platform
Verified suppliers and manufacturers
MadeInChina.com > Products > Instruments & Meters > Geographic Surveying Instrument > Other Geographic Surveying Instruments
Swipe or use the arrows to view product images.

Multi Resistivity Cable for Electrical Resistivity Tomography

Price $1000.00
Min Order 1 Set
Availability In Stock
Shipping From Shaanxi, China
Popularity 363 people viewed
Send Inquiry View Full Page
Model NO.:
resistivity cable
Accuracy:
<1mm
Horizontal Line:
1
Vertical Lines:
1
Cable Take out:
Molded Electrode Take-out
Cable Conductor:
32 Conductor
Cable Od:
7.0mm
Connector:
18 Pin, 26 Pin, 32 Pin or 40 Pin Optional
Electrode Spacing:
0.5m, 2m, 5m, 10m, 15m, 20m or Customized
Offset:
5m, 10m, 20m or Customized
Working Temperature:
-40 to +70 Degree Centigrade
After-sales Service:
Available
Warranty:
1 Year
Trademark:
SEIS TECH
Transport Package:
Standard Export Carton
Specification:
10, 11, 21, 24 or 32 channel
Origin:
China
HS Code:
9015800090
Product Description

Multi-electrode resistivity cable ( IP resistivity cable) is specially made to be used for electrical resistivity tomography, deep resistivity measurements, self potential and induced polarization(IP) measurements. It is usually work with multi-electrode resistivity instruments and switch boxes for Groundwater exploration, geotechincal investigation, monitoring of dams and dikes, environmental studies, geological survey, mineral prospecting, archaeology, detecting of cavities and buried ojbects, underwater, boreohole and cross-hole measurements.

- Ideal for automatic transfer of multi-electrodes.

- Lighter weight but maintaining the same low noise level.

- Robust design, strong mechanical strength and good insulation performance.

- Compatible with all main stream resistivity meter, resistivity system and devices: ABEM, ARES, GDD, IRIS SYSCAL PRO, PASI RM1 Earth  Resistivity Meter and etc.

- Waterproof electrode takeout (Rainfall/ Shallow Water / Submersible optional )

- 10-electrodes / 11-electrodes / 12-electrodes / 16-electrodes/ 18-electrodes/ 21-electrodes/ 24-electrodes / 28-electrodes / 30-electrodes/ 32-electrodes / 42-electrodes / 48-electrodes / 56-electodes are optional.

-  Customized electrode numbering, section size, take-out type and spacing is available upon request.

Structure of Cable Conductor (Per core)7nos.of Bare Copper Wires Stranding(Copper Wire O.D. 0.12mm)
Numbers of Cable Conductors
- Standard 32 conductors(16x2x7/0.12)
- Customized cable conductors are available as per client's requests.
Electrode cable take-outMolded cable take-out in the color of red or blue.
Cable Jacket 7.2mm OD with color of orange.
Min. Breaking Strength 130 kgs.
Working Temperature -40ºC~+70ºC
 
Insulation Resistance≥1000 MΩ/km
Cross Section (Per core)0.08mm2
DC Resistance(20ºC)≤234Ω/km
Voltage Withstand Value (Per core)1000V
Current-Carrying Capacity per core
(constant current)		≤1A
 
Channel Numbers 21-channel (AB line) / 28-channel / 30-channel / 32-channel / 42-channel / 56-channel optional.
Custom electrode numbering available upon request.
Cable Outer Diameter7.2mm / 9.2mm available
Connector Type27-pin Connector / 32-pin Connector
50-pin Connector / 55-pin Connector
60-pin Connector / 61-pin Connector
Connector Lead-in type4m / 5m / 7m / 10m / 12m cable lead-in at one end or both ends.
Custom cable lead-in length available upon request.
Electrode take-out Split spring take-out / molded split spring take-out / Mueller clip take-out / KCK take-out / Kooter take-out / wire-wound take-out / encapsulated stainless electrode take-out optional
Electrode Spacing3m / 5m / 6m /10m / 20m optional.
Custom takeouts spacing available upon request.
Working Temperature-40ºC ~ +70ºC







  • Similar Products
Full Page Contact Supplier
↑