Nested Metal Corrugated Culvert/Steel Pipe Price

Steel Pipe Culvert/Assemble Galvanized Corrugated Steel Pipe Culvert/Nested Metal Corrugated Culvert

Nested corrugated steel pipe is composed of two half round segments which are bolted together to form a round pipe. There two standard
method to form a round pipe. Flange nested corrugated steel pipe and overlapped corrugated steel pipe. It suitable for the small diameter
pipe and easy to ship to the oversea market.

Nested corrugated culvert pipe offers a fast and economical solution to contractors and owners who require a strong casing to place arround
and already installed utility line. This can be done easily without disrupting the line to be encased. Also can be used in the petroleum,chemical
protection shell pipe,and infrastructure construction.
 

There are two standard methods to form a round pipe. Flange nested corrugated steel pipe and overlapped corrugated steel pipe. It suitable for
the small diameter pipe and easy to ship to the oversea market. Versatile half-round segments of corrugated steel in flange or notch type
configuration for easy of transportation.

Nested Corrugated culvert pipes are manufactured to meet the international quality strength corrugated metal pipe have great strength in proportion to their weight. Flexible structures can absorb  impact without breaking or disjointing.
 

 

The technical data included in this brochure is applicable to flange type pipe and bolting type pipe both. Related data on the other types are available on request. Corrugated metal culvert is made from galvanized steel sheets with corrugations 68mm width by 13mm depth and corrugations 75mm width by 25mm depth. The 68X13mm in 20 corrugations with an effective laying length 1360mm. The sheets in thickness from 1.6~4.2mm. The 75X25mm corrugations, if the sheet thickness is smaller than 3mm, it is in 16 corrugations with an effective laying length 1200mm, if the sheet thickness is bigger than 3mm, it is in 17 corrugations with an effective laying length 1275mm. Field assemble is accomplished by bolting the sections together at the flange with M12X40 galvanized nuts and bolts.