Swipe or use the arrows to view product images.
New Design Airbrush Makeup Compressor Set Suitable for Color Paint Art
| Price | $22.85 |
|---|---|
| Min Order | 10 Pieces |
| Availability | In Stock |
| Shipping From | Zhejiang, China |
| Popularity | 534 people viewed |
Model NO.:
MAC-018
Material:
Copper
Type:
Body Painting Supplies
Usage:
for Cosmetic, for Nails, Body Art
Set:
Set
Disposable:
Non-Disposable
Model:
Mac-018
Product Keywords:
Airbrush Makeup
Air Flow:
6/7/8L/Min(3 Stages Available)
Color:
White, Black, Red, Purple
Max Pressure:
25psi
Adapter:
100V -240V
Voltage:
12 Volt DC
Air Hose:
1.2m
MOQ:
50pieces
Certification:
CE&RoHS
Use:
Nails Art, Beauty Makeup, Temporary Tattoos
Trademark:
OEM&ODM
Transport Package:
Color Box
Specification:
Voltage: 12 volt DC
Origin:
Ningbo, Zhejiang, China
HS Code:
8424200000
Product Description
New Design Airbrush Makeup Compressor Set Suitable for Color Paint Art
Makeup Airbrush, Cosmetic Airbrush, Airbrush Compressor, Airbrush Compressor Set, Makeup Airbrush Compressor Set, Nails Airbrush Compressor, Air Spray Gun, Airbrush for Body Art, Airbrush Kit, Mini Electric Airless Spray Gun, Single-action Airbrush set
Mini Air Compressor has been designed for commercial arts, beauty makeup, illustratio, photo retouching, temporary tattoos, cake decorating, crafts, hobbies and so on.
Parameters:
- Model: MAC-018
- Type: air compressor airbrush set
- N.W. with battery: 1012g
- N.W. without battery: 900g
- Packaging size: 20.3*18.2*7.2cm
- Charging time: 1.5 hours
- Continuous use time: 1.5-2 hours
- Gear: high, medium, low
- Three lights of gear with green, blue, and orange
- Flow rates of 11, 10, and 9L/min, pressure remains unchanged
-12V 1200mAh
- Pressure value: around 30psi
- Airbrush: airbrush with 0.3mm caliber
- Cup capacity: 7cc & 20cc
- Tracheal length: 1.5m
- Control method: double-action trigger air-paint control
- Automatic off/on the air pump with the switch of airbrush
Product Display
1. Applications
Make Up, Cake Decorating, Nails Art, Model Painting,Tattoo Painting, Commercial Art etc.
2. How to Spray
a. Connect the airbrush with air supply pressure between 5-30PSI. Drop the material to be sprayed into
the mounted color cup on the top of the airbrush.
b. By drawing back on the trigger, paint will be released.
c. Adjust the paint amount with trigger and the distance airbrush held to surface to get wanted pattern.
d. Remove needle cap for a fine line or small dot, which is achieved by working very close to the surface
while releasing a very small amunt of paint.
e. Please keep the nozzle and nozzle cap clean. Dust will reduce atomization effect.
The Works from Airbrush Compressor Kit
Beauty&Makeup&Nail Beauty&Temporary Tattoo and So On
Cake Decorating
Art Creation&Auto, Motorcycle and Bicycle Body Pattern Creation and So On
Part of The Workshop
Kindly Note
1. Please debug the airbrush to the best state, and then use clean water to test it, if atomization is mormal, you
can use it with lolors or pigment.
2. Please use the airbrush stably, if dropped on the ground, it may affect the use effect, or damaged.
3. After use, please clean the airbrush soon to avoid clogging and affect the next use.
4. In order to protect the airbrush well, a professional person to change needle and nozzle will be recommended.
5. To prolong your airbrush gun's life span, please clean your gun in a proper way.
It will be better to clean with special airbrush cleaning liquid or 75% medical alcohol for cleaning. Alcohol may corrode the seal, so it is better to clean with special airbrush cleaning liquid.
Q&A
1.Problems:Paint nozzle leak or abnormal condition of spray.
Possible reason 1: The needle is bent or distorted.
Solutions: change accessories/parts.
Possible reason 2: Poor connection of nozzle and needle
Solutions: loosen the needle chucking nut, then use the needle touch the nozzle back and forth; screw tightly the needle chucking nut.
2.Problems:Could not spray or bad atomization
Possible reason 1: nozzle clogged.
Solutions: clean the nozzle by solvent.
Possible reason 2: the needle chucking nut is loose.
Solutions: loosen the needle chucking nut; pull out the needle and put it back ;screw tightly the needle chucking nut.
Possible reason 3: operation button doesn't work
Solutions: loosen the needle chucking nut; pull out the needle and put it back ;screw tightly the needle chucking nut.
Production Flow&Shipping Methods
Our Services
1. Reply your enquiry in 24 working hours.
2. Experienced staffs Answer all your questions in professional and fluent English.
3. Customized Design is available. OEM&ODM are welcome.
4. Exclusive and unique solution can be provided to our customer by our well-trained and professional engineers and staffs.
5. Special discount and protection of sales area provided to your distributor.
Why Choose Us
1. Up-to-date Products
Our excellent design team and penetrating market sense can seize the market trends at any time, providing the latest product for you with customization.2. Best Communication
Make sure to reply to your emails within 24 hours of the workday. MOBO arranges at least one staff to answer customers' questions at any time. We value and cherish every customer.
3. Secure PaymentThe concept of integrity management make more customers to feel we are their best partner and friend. The security of your goods and fund will be guaranteed.
4. Convenient LogisticsLess than 30km from Ningbo port, and about 200km from Shanghai port, so we have very convenient logistics facilities and can save the transport time and cost for you.
- Similar Products
$100.00
1 Piece (MOQ)
Ambition Ninja Max V2 Coreless Motor Wireless Tattoo Pen Machine
Yiwu Xiqi Trading Co., Ltd