Normally Open 2 Way Steam Pilot Operated Solenoid Valve

Solenoid Valve (SLA)

PRODUCTS
SLA Brass Series. 2/2-way Piston Solenoid Valve. Normally Open
Body Material: Forged Brass
Orifice: 15mm~40mm
Pipe Connection: 3/8"~1/2"
Fluid Media: Steam\Water\Hot Water\Air\Oil etc.


SOLENOID VALVE
2 WAY 1/8 TO 1 INCH,
HIGH PRESSURE UP TO 100BAR
24VDC 220VAC 380VAC



SOLENOID VALVE
2-Way normally closed solenoid valve;
Closed when de-energized, open when energized.
Body material: Brass, and stainless steel,
Voltage: 220VAC /230VAC/380VAC/50/60HZ 24VDC;
Voltage Tolerance: +10% to -10% applicable voltage;
Ambient Temp. 0 ~65 Fluids Temp 0 ~110
Flow as the arrow. Mounts in any position; Best position is
Solenoid vertical and upright diriction.
Serialized products. Small in size. Large flow rate. Widely use. L.
Coil can fix Germany Nass Coil.

Yuyao Sanlixin Solenoid Valve Co., Ltd specializes in designing and manufacturing all kinds of fluid solenoid valves.
Our solenoid valve have direct acting type, pilot operated type, piston types
The body can be made of brass, stainless steel, plastic, PTFE and aluminum and the seals can be made of NBR, EPDM,FKM, PTFE silicon
The valve size can be DN1.00mm to DN150mm; Media can be water, hot water, gas, air, steam. Light oil, weak acid& alkali fluids etc.
So our solenoid valves are suitable for all the general purpose equipment.