Swipe or use the arrows to view product images.
Oriented Silicon Steel 0.27mm CRGO Strip Baosteel
| Price | $2900.00 |
|---|---|
| Min Order | 20 Tons |
| Availability | In Stock |
| Shipping From | Shanghai, China |
| Popularity | 405 people viewed |
Model NO.:
065/070/075/080/080/085/090/095
Type:
Oriented Silicon Steel
Standard:
GB, AISI, ASTM, DIN, BS, JIS
Technique:
Cold Rolled
Shape:
Steel Coil
ID:
508mm
Nominal Thickness:
0.15-0.30
Annealing Temperature:
820±20ºC
Annealing Time:
1.5 to 2.5 Hours
The Rate of Heating and Cooling:
Rapid Heating or Cooling Should Be Forbidden
Annealing Atmosphere:
Nitriding and Oxidation Atmosphere Must Be Avoided
Nominal Width:
900~1200mm
Weight:
2~5t
Trademark:
Yahe International
Transport Package:
Standard Sea Shipping Packaging
Specification:
Steel Coil/Sheet/Strip
Origin:
China
HS Code:
7225110000
Product Description
Silicon steel, also known as silicon steel Sheet or Electrical Steel, it is a ferro-silicon soft magnetic alloy steel with very low carbon content, usually containing 0.5% to 4.5% silicon. The addition of silicon can increase the resistivity and maximum permeability of iron to reduce the coercivity, iron loss and magnetic aging.
The difference between oriented silicon steel and non-oriented silicon steel
Non-oriented silicon steel: ferro-silicon alloy with very low carbon content. In the deformed and annealed steel sheet, its grains are distributed randomly. The silicon content of the alloy is 1.5% to 3.0%, or the sum of the silicon and aluminum content is 1.8% to 4.0%. The products are usually cold-rolled plates or strips, which are mainly used to manufacture motors and generators.
The difference between oriented silicon steel and non-oriented silicon steel
Non-oriented silicon steel: ferro-silicon alloy with very low carbon content. In the deformed and annealed steel sheet, its grains are distributed randomly. The silicon content of the alloy is 1.5% to 3.0%, or the sum of the silicon and aluminum content is 1.8% to 4.0%. The products are usually cold-rolled plates or strips, which are mainly used to manufacture motors and generators.
- Similar Products
$1200.00
1 Ton (MOQ)
Single Phase Non CRGO Ei Lamination
Jiangyin Centersky Electrical Appliance Co., Ltd.