$240000.00
1 Piece (MOQ)
Full Automatic Energy Saving Blow Molding Machine Sfl8
Demark (Changxing) Injection System Co., Ltd.
Swipe or use the arrows to view product images.
PE PP HDPE LDPE Bottle Blow Molding Machine with Factory Price Cost
| Price | $50000.00 |
|---|---|
| Min Order | 1 Set |
| Availability | In Stock |
| Shipping From | Jiangsu, China |
| Popularity | 481 people viewed |
Model NO.:
BM
Type:
Extrusion Blow Molding Machine
Raw Material:
PE
Making Method of Parison:
Extrusion-Blow Molding
Automation:
Automatic
Computerized:
Computerized
Certification:
CE, ISO9001:2008
Suitable Material:
PE,PP, HDPE, LDPE
Oil Pump:
Hitech
Hydraulic Valve:
Northman
Contactor:
Schneider
Proximity Switch:
Riko
Touch Screen:
Hitech
Microcomputer Control System:
Mitsubishi
PLC:
Mitsubishi
Air Valve:
Airtac
Machine Name:
PE PP HDPE LDPE Bottle Blow Molding Machine with F
Trademark:
BORUN
Transport Package:
Plastic
Specification:
500ml-200L
Origin:
China
HS Code:
84774010
Product Description
PE PP HDPE LDPE Bottle Blow Molding Machine with Factory Price Cost
This model adopts fixed mould open-closing system and accumulator die.This model is automatic process with low noise, saving energy, high efficiency, safe operation, easy maintenance and other benefits. This model is widely used to produce chemical barrel, auto parts(water box, oil box, air-condition pipe, aoto tail), toys (wheel, hollow autobike, basketball stands, baby castle), tool box, vacuum cleaner pipe, chairs for bus and gymnasium,etc.This model can produce max 10L hollow plastic product.
Characteristic:
1.Control Unit: Japan Mitsubishi PLC programmable controller and Taiwan HITECH touch panel. English parameter process setting, state monitoring and products counting are convenient and intuitionistic. PLC automatic temperature control model.
2.Hydraulic Unit: It adopts international famous Japan YUKEN brand hydraulic valve and seal, proportional control. And has features of high stationarity and reliability, accurate operation, long longevity, quick response and so on.
3.Extrusion Unit: Hard gear surface decelerator; famous HFinverter inverter adopts Italian technology; Screw speed regulation adopts variable-frequency speed regulation control system. It has the features of stable rotate speed, powerful power, energy-saving and so on. Mixing screw has wide applicability to raw materials and the plasticization quality is even better. Energy-saving machine barrel and A-alloy heaters are adopted for heating
4.Die Head Unit: With single cylinder material-center-in accumulator head, is smooth and dependable. This die head adopts German technology and is made by special imported steel.
5.Clamping Unit: Adopts fixed mould open-closing system,fast and balanced.
6..Blow Fitting Unit: Down blowing fitting is equipped.
7. Lifter Unit: Four turbine reducer liter, lifting balance, quick, stable.
8. Electrical Components: All of the electrical components are made in Japan and Taiwan.
hydraulic parts
electronic parts
air control system
Characteristic:
1.Control Unit: Japan Mitsubishi PLC programmable controller and Taiwan HITECH touch panel. English parameter process setting, state monitoring and products counting are convenient and intuitionistic. PLC automatic temperature control model.
2.Hydraulic Unit: It adopts international famous Japan YUKEN brand hydraulic valve and seal, proportional control. And has features of high stationarity and reliability, accurate operation, long longevity, quick response and so on.
3.Extrusion Unit: Hard gear surface decelerator; famous HFinverter inverter adopts Italian technology; Screw speed regulation adopts variable-frequency speed regulation control system. It has the features of stable rotate speed, powerful power, energy-saving and so on. Mixing screw has wide applicability to raw materials and the plasticization quality is even better. Energy-saving machine barrel and A-alloy heaters are adopted for heating
4.Die Head Unit: With single cylinder material-center-in accumulator head, is smooth and dependable. This die head adopts German technology and is made by special imported steel.
5.Clamping Unit: Adopts fixed mould open-closing system,fast and balanced.
6..Blow Fitting Unit: Down blowing fitting is equipped.
7. Lifter Unit: Four turbine reducer liter, lifting balance, quick, stable.
8. Electrical Components: All of the electrical components are made in Japan and Taiwan.
| Model | Unit | BM-50S | BM-60S | BM-80S | BM-60D | BM-70D |
| Max. Product volume | L | 2.5 | 6 | 25 | 2 | 6 |
| Dry clcle | Pcs/h | 1500 | 1200 | 600 | 700x2 | 600x2 |
| Screw diameter | Mm | 50 | 60 | 80 | 60 | 70 |
| Screw L/D ratio | L/D | 24-30 | 24-30 | 25-30 | 24-30 | 24-30 |
| Screw drive power | KW | 11-15 | 15-18.5 | 37-45 | 15-18.5 | 18.5-30 |
| Screw heating capacity | KW | 7.8-8.5 | 10.8-12 | 16-20 | 10.8-12 | 12-14.5 |
| Output of HDPE | Kg/h | 30-35 | 60-68 | 120-140 | 60-68 | 70-85 |
| Oil pump drive power | KW | 5.5 | 5.5 | 22 | 5.5 | 5.5-7.5 |
| Clamping force | KN | 35 | 68 | 200 | 35 | 68 |
| Platen distance | mm | 138-368 | 178-538 | 400-900 | 138-368 | 178-538 |
| Capacity | L | 4.8 | ||||
| Max. Die diameter | Mm | 90 | 150 | 300 | 90 | 150 |
| Central distance of bi-die | Mm | 110-130 | 130-200 | 130-150 | 150-200 | |
| Max. Die diameter (Bi-die) | mm | 55 | 100 | 80 | 100 | |
| Central distance of three-die | Mm | 80-110 | 100-120 | 80-110 | 110-140 | |
| Max. Die diameter(three-die) | Mm | 40 | 60 | 40 | 70 | |
| Central distance of four-die | Mm | 60-85 | 60-85 | 60-85 | 70-100 | |
| Max. Die diameter (four-die) | Mm | 25 | 30 | 25 | 45 | |
| Die heat capacity | KW | 16 | ||||
| The average consumption | KW/H | 12.5 | 16.5 | 32 | 16.5 | 18.5 |
| Blowing pressure | MPa | 0.6 | 0.6 | 0.8 | 0.6 | 0.6 |
| Air volume | M³/min | 0.4 | 0.5 | 0.8 | 0.4 | 0.4 |
| Cooling water pressure | MPa | 0.2-0.3 | 0.2-0.3 | 0.3 | 0.3 | 0.3 |
| Water consumption | L/MIN | 30 | 50 | 80 | 60 | 70 |
| Dimension | L*W*H | 2.8*1.8*2.3m | 3.0*1.9*2.5m | 4.3*2.2*3.6m | 3.0*2.15*2.6m | 3.5*2.1*2.6m |
| Weight | Ton | 3 | 4.5 | 12.5 | 6.5 | 7.8 |
hydraulic parts
| COMPONENT | SUPPLIERS |
| OIL PUMP | TAIWAN HITECH |
| HYDRAULIC VALVE | TAIWAN NORTHMAN |
| COMPONENT | SUPPLIERS |
| MICROCOMPUTER CONTROL SYSTEM | JAPAN MITSUBISHI PLC |
| TOUCH SCREEN | TAIWAN HITECH TOUCH SCREEN (COLORFUL, BILINGUAL) |
| TEMPERATURE MODULE | TAIWAN 7118R |
| PROXIMITY SWITCH | TAIWAN RIKO |
| CONTACTOR | FRANCE SCHNEIDER |
| MOTOR | SIEMENS BEIDE THREE PHASE MOTOR |
| POWER RESOURCE | TAIWAN MEAN WELL |
| TANSDUCER | TAIWAN DELTA |
| COMPONENT | SUPPLIERS |
| AIR VALVE | TAIWAN AIRTAC |
Contact Us:
Mr. Xavier Guo
Tel: +86-512-58682331
Fax: +86-512-58682331
Mobile: +86-13405609100
borunmachinery.en.made-in-china.com
- Similar Products
$450000.00
1 Piece (MOQ)
Plastic Float Blow Molding Machine
Weifang Huayu Plastic Machinery Co., Ltd
Negotiable
1 Piece (MOQ)
Automatic Blow Molding Machine (L-BS514-2)
Zhejiang Lebao Plastics Equipment Factory