PTFE Floater for Magnetic Level Indicator, Water Level Gauge, Magnetic Ball

We produce Various magnetic ball for level switch, level transmitter or used for magnetic level gauge.

floater for magnetic level indicator, SS304 lining PTFE material

Specifications
floater\\magnet float ball 
1.Size:can be ordered 
2.Rated pressure:up to 15Mpa 
3.Operation Temperature: 350 
4.Density:>=0.6g/cm3

floater\\float ball for  level transmitter
Various kinds of floats made of different material, such as SS304, SS316, SS316L, PP, PTFE etc. Widely used in magnetic level switch and liquid level measurements. It has the good performance of corrosion resistance and anti-deformation.
Float ball
 
typical size of Tuble Float as bellow. we also do on clients working conditon. 
 Ball float liquid level transmitter catheters, is measured by the magnetic floating ball,Signal unit, electronic unit, junction box and install a composition, the proportion of general magnetic float is less than 0.5, can float on the surface and move up and down along the measuring tube, intraductal equipped with measuring element, it can will be under outer magnetic liquid level measurement signal is proportional to the resistance of the liquid level change signal, and converting electronic unit 4 ~ 20 ma, or other standard signal output.
Liquid level sensor module circuit, has the advantages of acid, moisture, shock, anti-corrosion, internal circuit has permanently within the current feedback circuit and protect circuit, can make the output current is not more than 28 biggest ma, it can be reliably protect power and secondary instrument is not damaged.