Menu
Suppliers Products
Global B2B sourcing platform
Verified suppliers and manufacturers
MadeInChina.com > Products > Industrial Equipment & Components > Filtration Equipment & Parts > Filter Membrane
Swipe or use the arrows to view product images.

PVDF Hollow Fiber 0.1 Um Mbr Membrane Microfiltration Water Filter Technology for Paper Plant Industrial Wastewater Treatment

Price $15.00
Min Order 1500 Sets
Availability In Stock
Shipping From Zhejiang, China
Popularity 394 people viewed
Send Inquiry View Full Page
Membrane Type:
Hollow
Type:
MF
Material:
PVDF Hollow Fiber
Membrane Structure:
Outside to Inside
Pore Size:
0.1um-0.03um
Weight:
15/12 Kgs
Membrane Area:
30/18 Square Meters
Trademark:
SHUIYI or Customized
Transport Package:
Standard Woonden Cases
Specification:
1250*2000*30 mm/1250*1300*30 mm
Origin:
Made in China
HS Code:
8421999090
Product Description
About Shuiyi

After years of honed in the competition, SHUIYI has become one of the few manufacturers in the industry with a full range of membrane technologies and products including microfiltration (MF), ultrafiltration (UF), nanofiltration (NF), and reverse osmosis (RO). 

Our membrane products are widely used in the application fields of municipal sewage reclamation, industrial wastewater zero discharge, reclaimed water reuse, pure water preparation, highly polluting wastewater treatment, river restoration, decentralized rural sewage treatment, process concentration, and separation, etc., with rich application experience and engineering project cases.

Introduction
SHUIYI latest Slufri® series MBR membrane products adopt lining reinforced PVDF hollow fiber membrane of new formulas and new processes. The operating flux, anti-fouling ability, and service life have reached the international leading level. It can realize low-cost and high-reliability treatment in many applications such as reclaimed water reuse and various industrial wastewater treatment.

Features
  1. Lower energy consumption and higher efficiency;
  2. Higher mechanical strength, slower flux decline, longer service life;
  3. Standardized modularization design for easy installment and replacement;
  4. Stable and reliable water production;
  5. Slower contamination speed, longer clean cycle.

Specifications
Membrane SpecificationsModelSMU-30ESMU-18ESMU-18MSMU-30A
MaterialSupport layer: PET
Separate layer: PVDF
Active Membrane Area 30 m218 m218 m230 m2
Nominal Pore Size0.1 μm
Hollow Fiber Inner/Outer Diameter2.05/2.6 mm
Filter TypeReinforced outside-in membrane
Membrane Module SpecificationsModel Dimensions1250×2000×30 mm1250×1300×30 mm572×1560×46 mm824×2200×46 mm
Outlet Connection SizeФ24Ф24Ф27DN32
MaterialEnd ABS
Sealing MaterialEpoxy resin/Polyurethane
Center PoleSUS304
WeightMembrane Weight (Dry)15 kg12 kg6 kg12 kg
Membrane Weight (Wet)30 kg20 kg9 kg25 kg
Operation ConditionsTemperature5~40ºC
SDI155000-10000 mg/L
pH2-10
Operating Flux (LMH)10-30
Backwash Flux (LMH)30-50
Recommended Transmembrane Pressure (TMP)0-35 kPa
Maximum Backwash Pressure70 kPa
Aeration Intensity60-120 Nm3/h·m2 shadow area
Chemical Cleaning pH Range 1-11
Quality of Permeate WaterTurbidity≤ 0.5 NTU
SS≤ 2 mg/L
PS. The design flux and backwash flux depend on the operation and maintenance of the entire system

Application:
  1. Municipal water supply
  2. Industrial water purification
  3. Municipal waste water treatment
  4. Industrial waste water treatment
  5. Landfill leachate advanced treatment
  6. Reclaimed water reuse
  7. Pretreatment of RO system
  • Similar Products
Full Page Contact Supplier
↑