Parallel Shaft Helical Gear box

F series parallel shaft helical gear box with Compact Construction, Saves Space for Mounting and Large Load-bearing Capacity

Key Specifications/Special Features:
1. High modularization design: May equip with various motor or other power input conveniently
2. Same machine type may equip with various power motor
3. Easy to realize the combination and junction between every machine type

4. Transmission ratio: Fine division, wide scope
5. Combined machine type may form very large transmission ratio
6. Output very low rotary speed

7. Form of installation: The position to be installed is not limited
8. High strength, compact: The box body is made of high strength cast iron
9. Gear and gear shaft adapts the gas carbonization, quenching and fine grinding process, therefore the bearing capacity of unit volume is high

10. Long lifespan
11. Under the condition of correct type chosen (including choosing suitable operation parameters) normal operation and maintenance
12. Life of main parts of speed reducer (except wearing parts) should not be less than 20, 000 hours

13. Wearing parts include lubricating oil, oil seal and bearing
14. Low noise
15. Main parts of speed reducer are processed, assembled and tested critically

16. High efficiency: Not less than 95%
17. It may bear the axial load that is not more than 15% of radial force
18. Output speed: 0.11-373r/min

19. Output torque: Up to 18000Nm
20. Motor power: 0.18-200kw