Swipe or use the arrows to view product images.
Passive Automatic Control Water Meter
| Price | $30.00 |
|---|---|
| Min Order | 1000 Pieces |
| Availability | In Stock |
| Shipping From | Zhejiang, China |
| Popularity | 463 people viewed |
Model NO.:
LXSJS~15E~20E
Install:
Horizontal
Medium Temperature:
Cold Water
Level Measurement:
B
Counter Instructions:
Digital
Nominal Diameter:
15-20
Application:
Civil
Principle:
Speed of Water Meter
Medium Pressure:
General Water Meter
Work Environment:
Dry Water Meter
Stucture:
Intelligent IC Card
Working Pressure:
P<=1.0MPa
Trademark:
OEM
Transport Package:
Export Carton, Plastic Pallet
Specification:
Brass body, brass connectors
Origin:
Ningbo, China
HS Code:
9028201000
Product Description
No electronic parts, all mechanical quantitative device, the realization of prepayment management.
Suitable for outdoor installation in rural areas with complex environment, without rust and corrosion.
Description
This water meter is the company's independent research and development, independent manufacturing of a new mechanical pre-purchase quantitative water meter.Can achieve full mechanical automatic control switch valve, manual setting pre-purchase tonnage of a water meter.This meter is accurate, easy to operate, easy to install, suitable for urban and rural water supply measurement and management.
Features
MAIN TECHNICAL DATA
INDICATING ERROR
At low zone is ±5% from minimum flow rate (q1) to transitional flow rate (q2) exclusive boundary
At high zone is ±2% from transitional flow rate (q2) to overload flow rate(q4)
DIMENSIONS AND WEIGHT
Installation and maintenance
FACTORY:
Suitable for outdoor installation in rural areas with complex environment, without rust and corrosion.
Description
This water meter is the company's independent research and development, independent manufacturing of a new mechanical pre-purchase quantitative water meter.Can achieve full mechanical automatic control switch valve, manual setting pre-purchase tonnage of a water meter.This meter is accurate, easy to operate, easy to install, suitable for urban and rural water supply measurement and management.
Features
- Safe and reliable: all mechanical structure, stable, anti - interference, and electricity independent.
- Warning hint: when the remaining water is insufficient, the water output decreases slowly.
- Real-time display: users can view the remaining amount of water through the reading window.
- Automatic closing: when the water meter consumption reaches the amount of water purchased by the user, the valve will be automatically closed.
MAIN TECHNICAL DATA
- Working pressure: P≤1.0Mpa
- Pressure loss: △P≤0.063Mpa
- Working temperature: 0.1ºC~30ºC
- Flow parameters
| Type | Size | Q3/Q1 | Q3 | Q2 | Q1 |
| mm | m3/h | ||||
| LXSJS-15E | 15 | 80 | 2.5 | 0.05 | 0.031 |
| LXSJS-20E | 20 | 80 | 4 | 0.08 | 0.05 |
At low zone is ±5% from minimum flow rate (q1) to transitional flow rate (q2) exclusive boundary
At high zone is ±2% from transitional flow rate (q2) to overload flow rate(q4)
- Under normal working conditions, after 100 valve switches, the leakage shall not exceed the range of the following table
| Size/mm | Leakage m3/h≤ |
| 15 | 0.015 |
| 20 | 0.02 |
DIMENSIONS AND WEIGHT
| Type | Size | Length L | Height H | Width B | Connecting Thread | Weight | |
| mm | D | d | kg | ||||
| LXSJS-15E | 15 | 185 | 120 | 95 | G3/4 | R1/2 | 1.2 |
| LXSJS-20E | 20 | 215 | 123 | 95 | G1 | R3/4 | 1.4 |
Installation and maintenance
- Water meter selection should be based on the pipe often used flow rate is less than or close to the common flow rate of the water meter is appropriate, can not be determined simply by the pipe diameter water meter.
- Water meter must be installed horizontally, counting up, the arrow direction of the case should be consistent with the flow direction, the top of the water meter should be left more than 200mm of space, in order to facilitate the purchase of water operation;Water meter must be installed in front of the valve, so as to disassemble and pre-purchase water meter.
- Installation location should avoid exposure, freezing, pollution and water flooding, so as to disassemble and read the meter.
- Before the new installation of pipes, be sure to wash the stones, silt, hemp and other debris in the pipe clean before installing the water meter, so as not to cause water meter failure.
- To measure correctly, the tap should be higher than the meter.
- Water meter should not be directly connected to the pipe, water meter and pipe should be connected by connecting pipe, sealing washer, connecting nut, disassembly, do not force hard wrench, so as not to twist the case water meter affect normal operation.
- It is strictly prohibited to install and disassemble the water meter by yourself and install it improperly, so as not to cause damage to the metering machine and make the water meter unable to work normally.
FACTORY:
- Similar Products
$6.00
1000 Pieces (MOQ)
D3 Single Jet Hot Plastic Water Meter
Ningbo Xingyuan Meter Technology Co., Ltd.
$100.00
100 Pieces (MOQ)
R100 Single Jet Dry Typ Water Meter with Output Pulse (13D-1)
Ningbo Ningxin Meter Technology Co., Ltd.
$13.00
1000 Pieces (MOQ)
R400 Volumetric Piston Type Water Meter
NINGBO KEYLINE SMART METER CO., LTD.