Swipe or use the arrows to view product images.
Phase Sequence Tester Indicator 3 Phase Rotation Tester Digital Phase Indicator Detector LED Meter
| Price | $80.00 |
|---|---|
| Min Order | 1 Piece |
| Availability | In Stock |
| Shipping From | Hubei, China |
| Popularity | 401 people viewed |
Model NO.:
EPR60
After-sales Service:
Remote Guidance
Warranty:
1/2 Years Free Warranty and Lifetime Maintenance
Display:
Indicator
Installation:
Direct Connected
Electric Equipment:
Three-phase Four-wire
Theory:
Electronic Meter
Measured Signal:
Continuous Wave
Certification:
RoHS, ISO, CE
Customized:
Non-Customized
Functions:
Phase Detection (Positive Phase, Reverse Phase), L
Power Supply:
9V Battery, Continuous Use Time Is About 70 Hours
Measurement Method:
Non-Contact Clamping Method
Wire Position:
The Wire to Be Measured Is in The Center of The Ja
Frequency:
50Hz/60Hz Automatic Recognition
Live Power Range:
AC70~1000V, 45/65Hz (Sine Wave Continuous Input),
Measure The Highest Voltage:
AC1000V
Clamp Wire Size:
Outer Diameter Phi 1.5mm~48mm
Battery Check:
The Power Indicator Light Is on After The Power Is
Clamp Lead Length:
0.6m
Instrument Size:
Length 117.6mmwidth 81mmthickness 25mm
Automatic Shut-Down:
About 6 Minutes After Power on, The Meter Will Aut
Battery Voltage:
When The Battery Voltage Drops to About 5.2V, The
Weight:
Meter: 260g (Including Battery)
Maximum Rated Power:
300mva
Trademark:
EP Hipot Electric
Transport Package:
Carton
Specification:
260g
Origin:
China
HS Code:
903031100
Product Description
General Information:
The EPR60 three phase rotation indicator (also called: non-contact phase detector) is a major breakthrough in the traditional phase sequence detection method. In the traditional phase sequence detection, the terminal of the three-phase wire must be removed, and the three exposed clips or test pins of the phase sequence meter must be connected to the exposed 3 live wires, and EPR60 adopts clamp-shaped non-contact inductive measurement. There is no need to remove the wires or touch the high-voltage exposed live wires. Directly clamp the three ultra-inductive high-insulation clamps to the insulation skins of the three-phase live wires to detect phases. At the same time, sound and light indicate the positive or negative state of the phase sequence of the three-phase power supply.
The EPR60 three phase rotation indicator also has functions such as live line inspection, simple power inspection, open circuit search, break point location, line maintenance and so on.
The EPR60 three phase rotation indicator is quick and convenient to detect, and the display is clear at a glance, which greatly improves the safety of on-site testing, effectively protects the personal safety of operators, and increases productivity. It is the three-phase power supply phase sequence, motor detection, and circuit maintenance. Safety equipment.
Main technical data table:
Please contact EP Hipot Electric for more details on China Portable China Portable EPR60 Three phase rotation indicator (also called: non-contact phase detector).
The EPR60 three phase rotation indicator (also called: non-contact phase detector) is a major breakthrough in the traditional phase sequence detection method. In the traditional phase sequence detection, the terminal of the three-phase wire must be removed, and the three exposed clips or test pins of the phase sequence meter must be connected to the exposed 3 live wires, and EPR60 adopts clamp-shaped non-contact inductive measurement. There is no need to remove the wires or touch the high-voltage exposed live wires. Directly clamp the three ultra-inductive high-insulation clamps to the insulation skins of the three-phase live wires to detect phases. At the same time, sound and light indicate the positive or negative state of the phase sequence of the three-phase power supply.
The EPR60 three phase rotation indicator also has functions such as live line inspection, simple power inspection, open circuit search, break point location, line maintenance and so on.
The EPR60 three phase rotation indicator is quick and convenient to detect, and the display is clear at a glance, which greatly improves the safety of on-site testing, effectively protects the personal safety of operators, and increases productivity. It is the three-phase power supply phase sequence, motor detection, and circuit maintenance. Safety equipment.
Main technical data table:
| Items | Technical Specifications |
| Functions | Phase detection (positive phase, reverse phase), live line check, simple power check, lack of phase judgment, open circuit search, break point location, line maintenance. |
| Power Supply | 9V battery, continuous use time is about 70 hours. |
| Measurement Method | Non-contact clamping method |
| Wire Position | The wire to be measured is in the center of the jaws |
| Frequency | 50Hz/60Hz automatic recognition |
| Live Power Range | AC70~1000V, 45/65Hz (sine wave continuous input), static electricity detection. |
| Measure The Highest Voltage | AC1000V |
| Clamp Wire Size | Outer diameter ø1.5mm~ø48mm |
| Display | [Normal phase] The 4 phase detection lights turn on sequentially in a clockwise direction; |
| [Reverse phase] The 4 phase detection lamps turn on in order in a counterclockwise direction. | |
| [Live electricity] L1, L2, and L3 lights are on within the voltage setting range. | |
| [Lack of phase] L1 or L2 or L3 light is off. | |
| [Open circuit] L1 or L2 or L3 light is off. | |
| Buzzer | [Normal phase] The instrument emits intermittent short beeps; |
| [Reverse phase] The instrument emits a continuous long beep. | |
| Battery Check | The POWER indicator light is on after the power is turned on; the LOW BATTERY light is on when the battery is insufficient. |
| Clamp Lead Length | 0.6m |
| Instrument Size | Length 117.6mm×Width 81mm×Thickness 25mm |
| Automatic Shut-Down | About 6 minutes after power on, the meter will automatically shut down to reduce battery consumption |
| Battery Voltage | When the battery voltage drops to about 5.2V, the battery voltage low symbol is displayed, reminding to replace the battery |
| Weight | Meter: 260g (including battery) |
| Maximum Rated Power | 300mVA |
| Working Temperature and Humidity | -10ºC ~ 55ºC, below 80%rh |
| Storage Temperature and Humidity | -20ºC ~ 60ºC, below 90%rh |
| Dielectric Strength | 3.7kVrms |
| Suitable For Safety Regulations | EN61010-1: 2001, EN61010-031: 2002, pollution level 2, CAT III (600V), instant overvoltage 6000V. |
Please contact EP Hipot Electric for more details on China Portable China Portable EPR60 Three phase rotation indicator (also called: non-contact phase detector).
- Similar Products
$4.00
500 Pieces (MOQ)
Fibreglass Materials Watt-Hour Meter Box (TG-TFR1 Type)
Yueqing Long Road Electric Co., Ltd.
$80.00
1 Piece (MOQ)
4G Communication Type IoT Transparent Gateway
Nanjing Linkelec Technology Co., Ltd.