Plastic Coating Machine for Plastic Woven Bag

This machine laminates plastic film or Kraft-paper on the surface of PP or PE woven fabric with the adhesive material at melting status, or laminates color-printed OPP, CPP film to produce compounded bags.

This machine is highly automatic featured in advanced workmanship, easy operation, low power-consumption and high efficiency. It adopts double extrusion-dies with compounded double-roller to make even compounding. Its finished products are all high intensity and good performance both in application and appearance. This machine is equipped with auto-correcting device for auto guiding and sending processed material. It is speed-adjustable, easy to operate and adaptable to various sizes of compounded bags.

(A) SJ-FMZ1000 PLASTIC LAMINATION MACHINE
MAJOR PARTS:
1.1. -TWO EXTRUDERS, with RAIL AND WORKING TRACK SYSTEM
2. -FOUR LAMINATING ROLLERS, FOR DOUBLE SIZE LAMINATION
3. -TWO UNWINDER, Double units of unwinding with automatic tension control, automatically register the exact position.
4. - Double units of unwinder for kraft paper roll or OPP film roll
5. - Plastic woven fabric roll passing-through unit.
5. - Waste-cutting and piercing units (cutting by mechanism system and cutting by hand, two options both are provided)
6. -Major controlling electrical cabinet
7. -Automatically tension controlling electrical caninet
8. -Motors, speed adjustable, 15KW, 4KW, 1.5KW, 1.1KW, 0.37KW,
Frequency converter.

(B)
SPECIFICATION OF PLASTIC LAMINATION MACHINE SJ-FMZ1400

MAJOR PARTS
1: 1350 mm (53.15 INCH)
Double die 1350mm, main extruder (with working rail/running track)
2: Four rollers lamination section
3: Double units of un-winder (Auto Edge Correction)
4: Double units un-winder (2 Sets) for Kraft-paper or OPP film rolls
5: Waste edge cutting, and perforating section
7: Major electrical cabinet, operation panel
8: Automatic edge correction controller
9: Motor of frequency-conversion and speed-regulation 18.5KW one set,
Stepless speed-regulation motor 7.5KW one set,
Torque motor 60Nm 0.55Nm one set

Major specification
Extruder screw specification: Dia. 95 mm * 2800 mm
Screw Length and Dia. Ratio: 28D
Double die parallel, both lengths: 1350 mm (53.15 INCH)
Laminating rubber roller dia.: 303 mm
Working speed: 10m-80m/min. Adjustable
Max. Working width: 1150mm (45.28 INCH)
Production capacity 20-30 million pieces in one year
Main Extruder motor power: 18.5KW
Lamination drawing: Stepless speed-regulation motor 7.5KW one set
Heating power: 40KW
Roll-changing manner: Manual cutting off and changing
With automatic edge-folding and counting section.