Plastic Flex Corner Tape

Plastic flex corner tape-for inside and outside angles
Description and application:
Plastic flex corner tape manufactured from a special fibered-paper with added tensile strength to help prevent tearing, wrinkling or stretching. It is a quality flexible corner tape designed for use with all quality joint compound to reinforce gypsum board corners prior to painting, texturing or wall papering.

Performance include:
Plastic strips provide excellent corner protection and eliminates rusting
Works on gypsum board or plaster
For new or repair work
Folds to any angle
Excellent quality finished angles
Added thickness provides improved corner protection
Excellent indentation resistance
Very light and easy to install, never rusty,
High tensile strength, same with steel strip
Specification: Length: 100', 25'. Other length upon customers' request.

Easy installation
1. Apply first coat of joint compound
2. Gently press plastic flex corner tape into corner
3. Apply finishing coats of joint compound

Storage of plastic flex corner tape
Tape should be always be stored in closed cartons at normal room temperatures in an enclosed dry area.
Environmental limitations
When applying gypsum board flex plastic corner tape, follow the printed recommendations of the compound manufacturer. Apply tape only within their recommended minimum and maximum temperature range.
Joint preparation
Follow printed instructions on the joint compound container for mixing(if necessary) and use of compound prior to and during tape application.
Notice
We shall not be liable for incidental and consequential damages directly or indirectly sustained, nor for any loss caused by application of these goods not in accordance with current printed instructions or for other than intended use. Our liability is expressly limited to replacement of defective goods. Any claim shall be deemed waived unless made in writing to us within thirty 30 days from date it was or reasonably should have been discovered.