Swipe or use the arrows to view product images.
Plastic Injection Molding Machine Hxm218 Produce Egg Tray/ Automatic Injection Machine
| Price | $565000.00 |
|---|---|
| Min Order | 1 Piece |
| Availability | In Stock |
| Shipping From | Zhejiang, China |
| Popularity | 431 people viewed |
Model NO.:
HXM218
After-sales Service:
24 Hours Service Online
Warranty:
24 Months
Type:
Plastic Injection Molding Machine
Structure:
Horizontal
Plastic Type:
PS,ABS,PP,PE,HDPE,PA,EVA
Plasticizing Way:
Screw Type
Clamping Way:
Hydraulic & Mechanical
Automation:
Automatic
Computerized:
Computerized
Certification:
CE, ISO9001:2008
Energy Saving:
Servo Energy Saving
After Sales Service:
Engineers Avaiable to Service Machine
Voltage:
380V/50Hz, According to Countries
Showroom Locate:
Malaysia,Russia,Turkey,Uzbekistan
Condition:
New
Injection Weight:
400g PS
Space Between Tie Bar:
520X520
Machine Weight:
6.6 Ton
Trademark:
Highsun
Transport Package:
Standard Package
Specification:
5.745x1.34x2.125
Origin:
China
HS Code:
8477101090
Product Description
HXM218 injection molding machine
Product Advantages:
a. Super energy saving
Output power varies with the load, and no energy is wasted. In the holding pressure phase, the servo motor will reduce speed, with low energy consumption; during the cool-down period, the motor does not work, with zero power consumption. Compared with the ordinary injection molding machines, it can save 20%-80% of the power.
b. Hiigh precision and high stability
Equipped with the precise pressure sensor and rotary encoder, it can respectively monitor and feed back on flow and pressure. Based on the feedback, the high performance synchronous servo motor will adjust flow and pressure accordingly by changing the speed and torque. The closed-loop control can ensure the stability of product quality.
c. High response and high efficiency
The driving system responses with high sensitivity . It takes only 0.05 seconds to reach maximum value. The response speed is much faster than the ordinary injection molding machines. In that way, it significantly shortens the cycle time and increases the production efficiency.
Factory
1 workshop: SP(Middle-speed injection molding machine) and HXYD(Fully-electric and high-speed injection molding machine) production R & D workshop, also stored in the injection molding machine production required parts.
2 workshop: HXM(Servo energy injection molding machine) and HXH(High-speed injection molding machine) production R & D workshop. Storage of manufactured machine, such as HXM 128tons, 158tons, 418tons, 478tons, HXH 260tons, 280tons, 430tons and so on.
3 workshop: HXM(Servo energy injection molding machine), PVC injection molding machine, PET injection molding machine, HXS(Clear two-color injection molding machine) and HXH(High-speed injection molding machine) production R & D workshop. Storage of manufactured machine, such as HXM 98tons, 268tons, from 538tons to 2500tons, HXH 160tons, 200tons, 350tons, 380tons, HXS160tons, 200tons and so on.
4 & 5 workshop: HIGHSUN's independent R & D workshop, automatic processing center. According to customer feedback to the performance of the machine constantly improve, to provide customers with better injection molding machines.
6 workshop: Stored in screw barrel, hopper, hydraulic motor, thermocouple, valve, sheet metal injection molding machine accessories.
Company Introduction
China top 1 plastic injecion molding machine
a. Honored with "Top 3" manufacturer of comprehensive strength by NBPMA over the past decade.
b. Established in 1973. Concentrate on Injection Molding field more than 50 years.
c. It covers an area of 1.2 million square feet.
d. Sold to more than 40 countries around the world.
e. Annual output more than 7000sets,ensuring faster delivery time.
f. Worldwide sales reached 130 million US dollars, exports maintain steady growth.
| MODEL:HXM218 | |||||
| TECHNICAL PARAME TER TABLE | A | B | C | ||
| INJECTION UNIT | SCREW DIAMETER | mm | 45 | 50 | 55 |
| SCREW L/D RATIO | L/D | 22.2 | 20 | 18.2 | |
| INJECTION CAPACITY IN THEORY | cm3 | 349 | 431 | 522 | |
| INJECTION WEIGHT(PS) | g | 324 | 400 | 485 | |
| oz | 11.4 | 14.1 | 17.1 | ||
| INJECTION PRESSURE | MPa | 210 | 170 | 140 | |
| INJECTION RATE | g/s | 128 | 158 | 192 | |
| PLASTICIZING CAPACITY | g/s | 18 | 25 | 32 | |
| SCREW SPEED | rpm | 200 | |||
| CLAMPING UNIT | CLAMPING FORCE | KN | 2180 | ||
| MOVING MOULD-PLATE STROKE | mm | 520 | |||
| MAX. MOULD HEIGHT | mm | 580 | |||
| MIN. MOULD HEIGHT | mm | 200 | |||
| SPACE BETWEEN TIE-BARS (W×H) | mm | 520x520 | |||
| HYDRAULIC EJECTOR FORCE | mm | 80 | |||
| HYDRAULIC EJECTOR STROKE | KN | 150 | |||
| EJECTOR NUMBER | n | 9 | |||
| OTHERS | PUMP PRESSURE | MPa | 16 | ||
| MOTOR /DRIVING POWER | KW | 18.5/23 | |||
| HEATING CAPACITY | KW | 13.55 | |||
| MACHINE DIMENSION (L×W×H) | m | 5.745x1.34x2.125 | |||
| MACHINE WEIGHT | t | 6.6 | |||
| OIL TANK CAPACITY | L | 281 | |||
Product Advantages:
a. Super energy saving
Output power varies with the load, and no energy is wasted. In the holding pressure phase, the servo motor will reduce speed, with low energy consumption; during the cool-down period, the motor does not work, with zero power consumption. Compared with the ordinary injection molding machines, it can save 20%-80% of the power.
b. Hiigh precision and high stability
Equipped with the precise pressure sensor and rotary encoder, it can respectively monitor and feed back on flow and pressure. Based on the feedback, the high performance synchronous servo motor will adjust flow and pressure accordingly by changing the speed and torque. The closed-loop control can ensure the stability of product quality.
c. High response and high efficiency
The driving system responses with high sensitivity . It takes only 0.05 seconds to reach maximum value. The response speed is much faster than the ordinary injection molding machines. In that way, it significantly shortens the cycle time and increases the production efficiency.
Factory
1 workshop: SP(Middle-speed injection molding machine) and HXYD(Fully-electric and high-speed injection molding machine) production R & D workshop, also stored in the injection molding machine production required parts.
2 workshop: HXM(Servo energy injection molding machine) and HXH(High-speed injection molding machine) production R & D workshop. Storage of manufactured machine, such as HXM 128tons, 158tons, 418tons, 478tons, HXH 260tons, 280tons, 430tons and so on.
3 workshop: HXM(Servo energy injection molding machine), PVC injection molding machine, PET injection molding machine, HXS(Clear two-color injection molding machine) and HXH(High-speed injection molding machine) production R & D workshop. Storage of manufactured machine, such as HXM 98tons, 268tons, from 538tons to 2500tons, HXH 160tons, 200tons, 350tons, 380tons, HXS160tons, 200tons and so on.
4 & 5 workshop: HIGHSUN's independent R & D workshop, automatic processing center. According to customer feedback to the performance of the machine constantly improve, to provide customers with better injection molding machines.
6 workshop: Stored in screw barrel, hopper, hydraulic motor, thermocouple, valve, sheet metal injection molding machine accessories.
Company Introduction
China top 1 plastic injecion molding machine
a. Honored with "Top 3" manufacturer of comprehensive strength by NBPMA over the past decade.
b. Established in 1973. Concentrate on Injection Molding field more than 50 years.
c. It covers an area of 1.2 million square feet.
d. Sold to more than 40 countries around the world.
e. Annual output more than 7000sets,ensuring faster delivery time.
f. Worldwide sales reached 130 million US dollars, exports maintain steady growth.
- Similar Products