$20000.00
1 set (MOQ)
CNC Hydraulic C Channel Steel Punching and Cutting Machine
DONGYING AONA MACHINERY CO., LTD.
Swipe or use the arrows to view product images.
Pneumatic Power Stamping Punching Press Machine Ste-500sv High Quality Customized Double Crank
| Price | $99999.00 |
|---|---|
| Min Order | 1 Set |
| Availability | In Stock |
| Shipping From | Jiangsu, China |
| Popularity | 340 people viewed |
Model NO.:
STE-500sv
After-sales Service:
on Line Available
Warranty:
1 Year
Type:
Servo Punching Machine
Punch Shape:
Closed Punch
Slider Movement:
Single Action
Slider Drive Mechanism:
Crank Press
Controlling Mode:
Artificial
Automatic Grade:
Automatic
Power Source:
Mechanical Drive
Precision:
High Precision
Certification:
CE, ISO 9001
Condition:
New
Trademark:
Qiao Sen
Transport Package:
Standard Export Package
Specification:
STE-500sv
Origin:
Jiangsu, China
HS Code:
84629910
Product Description
| > | Hydraulic overload protection device | > | Air blowing device |
| > | Servo motor(Adjustable speed) | > | Independent control cabinet |
| > | Digital die height indicator | > | Mis-delivery detection device reserved interface |
| > | Slider and mold balance device | > | Photoelectric safety protection device |
| > | Electronic cam switch device | > | Oil-gathering silencer |
| > | Prejudging counter | > | Electric grease lubrication device |
| > | Air source connector | > | Touch (pre-break, prejudge, total count) |
| > | Second falling protection device | > | Air cooled chiller |
| > | Pneumatic mold pad device | > | Feeder (air, mechanical and NC) |
| > | Thin oil lubrication device | > | Leveling machine |
| > | Quick die change device (Die lifter, die clamper or die mover) | > | Rack |
| > | Upper part hit material device of slider | > | Manipulator |
| Press capacity | Impulse position | Slider strokes per minute(S.P.M) | Max mold height | Slider adjustment amount | |
| Ton | mm | Swing mode/mm | Full stroke/mm | mm | mm |
| 500 | 7 | ~60 | ~30 | 600 | 150 |
| Slide Area | Bolster Area | Side opening | Servo motor torque | Air pressure | Press accuracy grade |
| mm | mm | mm | Nm | kg*cm² | Grade |
| 2500*1000 | 2800*1100 | 1000*700 | 40000 | 6 | JIS 1 |
High strength steel frames
with small deformation
with small deformation
Slide rail adopt high frequency quenching technology,
its hardness could reach HRC45 degree or more.
Advantage: perfect wear resistance
its hardness could reach HRC45 degree or more.
Advantage: perfect wear resistance
The gear shaft is made of high-strength alloy,
all tooth surfaces are treated with medium frequency
Advantage: small wear, high accuracy,long service life
all tooth surfaces are treated with medium frequency
Advantage: small wear, high accuracy,long service life
Crankshaft
Alloy 42 CrMo Material
Advantage: 1.3 times Stronger than 45 steel
Alloy 42 CrMo Material
Advantage: 1.3 times Stronger than 45 steel
Ball Seat
Japanese grade TM-3 sintered copper alloy
Advantage: less failure rate with sawtooth ball
Japanese grade TM-3 sintered copper alloy
Advantage: less failure rate with sawtooth ball
| > | High strength frame structure, small deformation and high precision. |
| > | The forced thin oil circulating lubrication device is adopted, which is energy-saving, environment-friendly, and has an automatic alarm function. The stamping speed can be increased by adjusting the amount of oil. |
| > | 9 processing modes are built-in, and each product can select the processing curve most suitable for component processing,So as to achieve high precision, high efficiency and high energy conservation. |
| > | Compared with traditional presses, it has simple structure, high mechanical transmission efficiency and low maintenance cost. |
| > | According to the characteristics of products/materials, the stamping forming speed can be reduced during the material processing to achieve the best forming speed of products/materials. Thus reducing vibration and stamping noise; Improve product accuracy and extend the service life of the mold. |
| > | According to different products, different heights are required. The stroke of the punch can be set arbitrarily, which greatly shortens the stamping time and improves the efficiency. |
| Q: | Are you a factory or trading company? |
| A: | We are an integrated company of industry and trade. |
| Q: | What are your main products? |
| A: | We specialize in manufacturing power press machine, decoiler straightener and feeder, metal stamping die, transfer arms etc. (we could help customers contract to build the whole stamping line projects.) |
| Q: | What's the delivery time? |
| A: | The standard machine is 25 to 30 days after payment. If asked to supply whole production line by our customer, we will confirm the delivery time based on the specific project itself. |
| Q: | What's your payment term? |
| A: | we advise 30% T/T deposit, balance paid before shipment. |
| Q: | Do you receive OEM? |
| A: | Yes, we warmly welcome customers to do OEM in our factory. |
- Similar Products
$91000.00
1 Set (MOQ)
CNC Servo Turret Punching Press Machine
ZFY Machine Manufactory (ANHUI) Co., Ltd.
$8000.00
1 set (MOQ)
CNC Channel Steel Hole Punching and Cutting Machine
DONGYING AONA MACHINERY CO., LTD.