$0.20
500 Pieces (MOQ)
Bimetal Motor Thermal Protector 17am for Charger
Dongguan Esun Intelligent Technology Co., Ltd.
Swipe or use the arrows to view product images.
Polymer Fuse Cutout, Drop out Fuses 11 Kv 200A
| Price | $11.00 |
|---|---|
| Min Order | 1 Piece |
| Availability | In Stock |
| Shipping From | Hubei, China |
| Popularity | 421 people viewed |
Model NO.:
PRWP-11/200
Breaking Capacity:
High
Type:
Distribution
Usage:
High Voltage
Shape:
Circle
Fusing Speed:
T K
Fusing Device:
Fuse Link
Standard:
IEC IEEE
Safety Standards:
IEC 60282-2,ANSI C37.41,ANSI C37.42
Accessories:
Asr, Mema Brackets
Insulator Material:
Poymeric
Color:
Grey
Trademark:
OEIpower
Transport Package:
Cartons Pallets Wooden Case
Specification:
IEC282-2 IEEEc37-41
Origin:
China Nanyang
HS Code:
85351000
Product Description
CUT-OUT
TYPE "OEI" "PRW" STANDARD CUTOUT DISTRIBUTION TECHNICAL SPECIFICATION| Model | YH10W-11 |
| Rated Voltage | 10~15kV |
| Material of Fuse Support | Polymer |
| Rated Current of Fuse Tube | 100A, 200A, 300A |
| Interrupting Current (Asym.) | 8kA |
| BIL(Phase to Ground / Phase to Phase) | 95kV / 110kV |
| Power-frequency Withstand Voltage to Earth (1min) | 42kV |
| Power-frequency Withstand Voltage Phase to Phase (1min) | 48kV |
| Creepage Distance | 340mm |
| Standard | IEC 60282-2,ANSI C37.41,ANSI C37.42 |
| Class | Distribution Class |
| MEMA Type Mounting Brackets | Couple with or not (As per clients' request) |
| Arc-shortening Rod | Couple with or not (As per clients' request) |
| Fuse Link | Couple with or nor (As per clients' request, please indicate the fuse link rating of need) |
| Material of Fuse Tube | Fiber Glass |
| Material of Contacts | Red Copper with Silver Plating |
| Material of Casting | Brass (or bronze as per clients' request) |
| Material of Terminals | Brass with Silver Plating (or others like tin, as per clients' request) |
| Terminal Type | Parallel groove type ( or eyebolt type, as per clients' request) |
| Other Material | Hot-dipped Galvanized Steel. Stainless Stell 304 |
| Pachage Standard | Carton and Pallet |
Gama:
15 , 24 y 36 kV
12 - 25 - 40 - 63 -100 - 140 A
Número de Defectos: 1 , 2 (Estándar) , 3.
Tiempo de Regeneración : Min. 30s.
Principales Características :
Dispositivo Autoalimentado. Utilización conjunta con Interruptores automáticos.
Importante reducción en los costes derivados de mano de obra y sustitución de fusible de los Cut-Out
convencionales derivados de fallos transitorios, ocasionados por tormentas eléctricas , accidentes
vegetales , etc...
Ausencia de Arcos y desgaste en los contactos.
Reutilización del equipo tras su rearme manual y acoplamiento en su base.
The Fuse Cutout type DHE was developed to operate in overhead distribution systems rated at 12-15 kV and 15-27,kV or 27-38 kV grounded systems with 100 or 200 A nominal currents.
Especially designed to protect transformers, capacitors, cables or lines.
It is robust construction, made of rigorously tested material, will interrupt all faults under the
most severe conditions, maintaining mechanical and electric characteristics.
The inserts, hardware and structural bolts and nuts are made from heavy galvanized steel.
The Fuse Cutout type OEI PRW can be applied on all three-phase system rated at or below the maximum operational rating of the cutout. In highly polluted environments or environments with high levels of salinity, a cutout may be used with a higher nominal rating than
that of the system where it is being installed, where the insulator will have a greater leakage distance to ground, allowing for
increased safety against discharge. For an even better protection against abrasions, the hardware may be supplied in stainless
steel. The fuse cutout type OEI PRW has attachment hooks in aluminum.
The Fuseholder has a stainless steel flipper, which associated with a spring doesn't allow the fuse link to be subject to traction
forces of over 3 Kgf, especially during closing. This me chanism also allows for high speed fuse link separation. The fuse cutout
type OEI PRW allows for the insertion of the fuse tube in a precise man ner and always in perfect alignment, due to the large distance
between the grunion pocket. Lower contact, silver-to-silver, provide du el current path, independent of hinge pivot. Stainless-steel
back-up springs prevent arcing when tube rises in hinge during recoil. The fuse cutout type OEI PRW may be transformed into a DICONNECT up to 300 A, by simply changing the fuse tube for an electrolytic copper blade.
The DHE Fuse Cutouts conform to ANSI and IEC standards, with independent tests performed At:
CPRI Always use quality fuse links. Only they can assure excellent performance.
- Similar Products
Negotiable
3 Pieces (MOQ)
Ess5 Fast Fuse for Energy Storage DC1500V 630A to 2000A
ZHEJIANG FUERZI ELECTRIC TECHNOLOGY CO., LTD.
$100.00
1 Piece (MOQ)
New Ferraz/Mersen Nh Type Fuse
Jiangsu Core Drill Age Electronic Technology Co., Ltd
$6.50
1000 Pieces (MOQ)
Kodery 33kv Length 787mm 30A Type K Cartridge Fuse Link
ZHEJIANG KODERY ELECTRIC CO.,LTD
$50.00
500 Pieces (MOQ)
DC Fuse Fast-Acting Ar Ceramic Fuse Link Rapid Fuses
ZHEJIANG FUERZI ELECTRIC TECHNOLOGY CO., LTD.
$0.03
1000 Pieces (MOQ)
SMD One Time Fuse 2410 Time-Lag (slow-blow)
Shenzhen Kangtai Songlong Electronic Technology Co., Ltd.