Swipe or use the arrows to view product images.
Polyurethane Foam Resin for Pipe Insulation System House White Component
| Price | $3000.00 |
|---|---|
| Min Order | 200 kg |
| Availability | In Stock |
| Shipping From | Shandong, China |
| Popularity | 291 people viewed |
Model NO.:
SDB10D-Z01
CAS No.:
Polymer
Formula:
Polymer
EINECS:
Polymer
Material:
Polyurethanes/PU
Usage:
Engineering Plastics
Plastic Properties After Heated:
Thermosetting Plastic
Plastic Forming Method:
Injection
Color:
Yellow
Core Density:
≥60 Kg/M3
Radial Compressive Strength:
≥0.3MPa
Initial Thermal Conductivity(50°c):
≤0.033W/(M•K)
Close Cell Content:
≥88%
Water Absorption:
≤10%
Appearance:
Pale Yellow Liquid.
Specific Gravity at 25°c:
1.10±0.10 g/cm3
Viscosity at 25°c:
300±100 Cps
Shelf Life:
12 Months
Trademark:
shunda
Transport Package:
Iron Drum
Specification:
200kg
Origin:
China
HS Code:
39072090
Product Description
DESCRIPTION
SDB10D is a kind of blend polyol used for pipe insulation system for city heating or cooling. When it combined with isocyanate(PM200) leads to the formation of rigid polyurethane foam by using PU injection foam equipment .The foam formed has the characteristics as following:
Importance: The above mentioned are typical test values, and the specific data may vary slightly due to environmental conditions.For our products, the data are not legally binding.
Other unmentioned matters and TDS&MSDS.Please visit our official website shundapu.en.made-in-china.com
Or please contact us for information:
SDB10D is a kind of blend polyol used for pipe insulation system for city heating or cooling. When it combined with isocyanate(PM200) leads to the formation of rigid polyurethane foam by using PU injection foam equipment .The foam formed has the characteristics as following:
- The thermal conductivity is low, which can meets the requirements of city heating and energy saving.
- Service life of the foam is very long, over 30 years.
- High temperature resistance and good dimensional stability of the foam, the highest temperature range is 140 ºC.
| Physical Properities | Test Method | Metric | Value |
| Core Density | GB/T 6343-2009 | kg/m3 | ≥60 |
| Radial Compressive Strength | GB/T 8813-2008 | MPa | ≥0.3 |
| Initial Thermal Conductivity(50°C) | GB/T 10294-2008 | W/(m·K) | ≤0.033 |
| Close Cell Content | GB/T 10799-2008 | % | ≥88 |
| Water Absorption | GB/T 8810-2005 | % | ≤10 |
| Air bubbles | GB/T 29047 | mm | 1/3Insulation thickness. |
| Average cell size. | GB/T 29047 | mm | ≤0.5 |
Other unmentioned matters and TDS&MSDS.Please visit our official website shundapu.en.made-in-china.com
Or please contact us for information:
- Similar Products
$2500.00
200 kg (MOQ)
Polyurethane Foam Raw Material Spray Paint for Bus
Yantai Shunda Polyurethane Co., Ltd.
$3.00
1 kilogram (MOQ)
China Factory Weather Resistant Ski Boot Buckle Tpee
Dongguan Pres Plastic Materials Co.,Ltd