Menu
Global B2B sourcing platform
Verified suppliers and manufacturers

Power Supply D-30A Industrial Power Supply Dual Output LED Driver

Price $8.00
Min Order 1 pieces
Availability In Stock
Shipping From Zhejiang, China
Popularity 225 people viewed
Model NO.:
D-30A
Output Type:
Single
Warranty:
3 Years
Output Power:
32W
Input Voltage:
85-132VAC/176-264VAC
Connection Mode:
Series Switching Power Supply
Starting Mode:
Separate-excited Switching Power Supply
Voltage Regulating Mode:
Width Modulation Type
Power Supplying System:
Terminal Power Distribution Equipment
Energy Transmission:
One-way Transmission
Modulation System:
PWM
Certification:
CE, RoHS, ISO, CCC, Bis
Brand:
Nvvv
Output Current:
CH1:4A ;CH2:1A
Product Name:
D-30A
MOQ:
1
Type:
Switching Power Supply
Input:
220V
Packing:
Carton
Output:
5V,12V
Output Voltage:
5V,12V
Output Frequency:
47-63Hz
Trademark:
NVVV
Transport Package:
Safety Packaging
Specification:
129*98*38mm
Origin:
Zhejiang, China
Product Description
Products Description
 
D-30  30W Two Groups of Switching Power Supply
ProjectD-30AD-30B
OutputOutput channelCH1CH2CH1CH2
DC voltage5V12V5V24V
Rated current4A1A2A1A
Current range0.5-5A0.1-1.5A0.5-2A0.1-1A
Rated power32W35W
Ripple and noise <50mV<120mV<50mV<120mV
Voltage accuracy±2%±10%±2%±10%
Output voltage regulation rangeCH1: ±10%
Load adjustment rate±1.5%±3.0%±1.5%±3.0%
Linear adjustment rate±0.5%±1.0%±0.5%±1.0%
Inputoverload protection85-132VAC/176-264VAC 47Hz~63Hz (254VDC~370VDC)
Efficiency (typical) >78%>81%
Working current<0.75A 110VAC   <0.4A 220VAC
Impulse current110VAC  18A,  220VAC  45A
Start, rise, hold time500ms,30ms,50ms :220VAC/1200ms,30ms,10ms :115VAC
Protectoverload protection105% - 150% type: constant current output + VO reduced to undervoltage point cut off output reset: power on again
Short circuit protection+VO drops to undervoltage point, close output
Environmental ScienceWorking temperature and humidity-10ºC~+50ºC;20%~90RH
Storage temperature and humidity-20ºC~+85ºC;10%~95RH
Safety regulationsWithstand voltageInput output: 1.5kVac input shell: 1.5kVac output shell: 0.5kvac for 1 minute
Leakage current5mA at 1.5kVac input-output
Leakage currentInput output at 220VAC < 1mA
Isolation resistanceInput output, input shell, output shell: 500VDC / 100M Ω
Othersize129*98*38mm
Net weight / gross weight400/430g
Remarks Ripple and noise measurement method: use a 12 "twisted pair, and connect 0.1uF and 47uF capacitors in parallel at the terminal, and measure at 20MHz bandwidth.  The efficiency is tested at an input voltage of 230VAC, rated load, and an ambient temperature of 25 ºC. Accuracy: including setting error, linear adjustment rate and load adjustment rate. Linear regulation test method: under rated load from low voltage to high voltage test load regulation test method: from 0% - 100% rated load. The start-up time is measured under the cold start state. The quick and frequent switch on and off may increase the start-up time. When the operating altitude is higher than 2000m, the operating environment temperature needs to be reduced by 5 ºC / 1000m
Product packaging
Company Profile
Our Team
FAQ
  • Similar Products
Full Page Contact Supplier