Swipe or use the arrows to view product images.
Prefabricated Strong Structural Steel Column Building with Male Pin for Concrete
| Price | $105.00 |
|---|---|
| Min Order | 200 Square Meters |
| Availability | In Stock |
| Shipping From | Guangdong, China |
| Popularity | 282 people viewed |
Model NO.:
LXB-102
Crane:
with or Without (1 to 50 Tons)
Roof and Wall Panel:
EPS/Rock Wool/Polyurethane/MGO/Cement Foam Panel
Gutter:
Color Steel Sheet, Galvanized Steel, Stainless Steel
Raw Materials:
Q235/Q345
Span:
From 10m to 100m
Packing Method:
Flat Pack, Open Top Container, by Steel Skid, etc.
Type:
H-Section Steel
Standard:
GB, ASTM, BS, SGS
Trademark:
Low-alloy High-tensile Structural Steel
Forming:
Hot-Rolled Steel
Connection Form:
Bolt Connection
Member:
Steel Beam
Type of Steel For Building Structure:
High-Strength Steel
Carbon Structural Steel:
Q235
Residential Wall Structure:
Wallboard
Application:
Steel Workshop, Steel Structure Platform, Steel Fabricated House, Structural Roofing, Frame Part, Steel Walkway and Floor, Steel Structure Bridge
Trademark:
Lixin
Transport Package:
Seaworthy
Specification:
By Customized
Origin:
Foshan, Guangdong, China.
HS Code:
73089000
Product Description
This kind of prefabricated steel structural building is grouped by large Q345 (high strength) steel beams, columns, sandwich panel and light tile.
Steel structure workshop project is the third generation construction. It combines H section and c/z section into the frame with the profiled steel sheet or sandwich panel as the wal and roof. The traditional reinforced concrete construction has aready been taken place by this kind of construction in developed contries. It has many excellent charateristics such as light weight, larger span, less marerial, low cost, less foundation, short building cycle, safe, beautiful, ect. It is widely used in single industrial factory, warehouse, business construction, office, parking lots, residence and so on.
STEEL STRUCTURE MEMBERS PRODUCTION (Fabrication) PROCESS :
1. Prepair raw materials : cut steel plate or use internation size H section steel and angle steel,round tube,round steel,square tube etc.;
2. Assembly and welding: our welders will follow the drawings to assembe the steel members and weld them together as a entire beam/column/brace and so on; (Our quality inspector will check the steel pieces after finish welding,this is the first quality check)
3. Sand blast : After finish welding and polishiing,our sand blast effect can reach internation 2.5 high grade,very good for resist rust; (Secondary quality check)
4.Paint : Within 2 hours after sand blast,all the steel members should be paint. Client can choose any color and any brand of paint. (The third quality check)
5. Inspect the goods by client : After we finish a part of fabrication work,we will invite clients to check the goods before we pack the steel frame.
6.Packing and loading : If clients require us to load the goods by close containers,we will pack the steel structure members one by one on the steel skid and tie the whole steel package well. (The fourth quality check )
Please check the details drawings as follow :
Please provide the following steel structure building importance calculation factors for quotation :
(1) Exact size : length * width *height ;
(2) Wind speed (max speed);
(3) Snow load (kg/m2 in max situation);
(4) Earth quake grade (if have) ;
(5) Live load and dead load for roof and flooring(special for mutli-floors building);
(6) The requirements for window and door;
(7) Max height and weight for crane to lift;
(8) What are the materials for roof and wall ?
Steel structure workshop project is the third generation construction. It combines H section and c/z section into the frame with the profiled steel sheet or sandwich panel as the wal and roof. The traditional reinforced concrete construction has aready been taken place by this kind of construction in developed contries. It has many excellent charateristics such as light weight, larger span, less marerial, low cost, less foundation, short building cycle, safe, beautiful, ect. It is widely used in single industrial factory, warehouse, business construction, office, parking lots, residence and so on.
STEEL STRUCTURE MEMBERS PRODUCTION (Fabrication) PROCESS :
1. Prepair raw materials : cut steel plate or use internation size H section steel and angle steel,round tube,round steel,square tube etc.;
2. Assembly and welding: our welders will follow the drawings to assembe the steel members and weld them together as a entire beam/column/brace and so on; (Our quality inspector will check the steel pieces after finish welding,this is the first quality check)
3. Sand blast : After finish welding and polishiing,our sand blast effect can reach internation 2.5 high grade,very good for resist rust; (Secondary quality check)
4.Paint : Within 2 hours after sand blast,all the steel members should be paint. Client can choose any color and any brand of paint. (The third quality check)
5. Inspect the goods by client : After we finish a part of fabrication work,we will invite clients to check the goods before we pack the steel frame.
6.Packing and loading : If clients require us to load the goods by close containers,we will pack the steel structure members one by one on the steel skid and tie the whole steel package well. (The fourth quality check )
Please check the details drawings as follow :
Please provide the following steel structure building importance calculation factors for quotation :
(1) Exact size : length * width *height ;
(2) Wind speed (max speed);
(3) Snow load (kg/m2 in max situation);
(4) Earth quake grade (if have) ;
(5) Live load and dead load for roof and flooring(special for mutli-floors building);
(6) The requirements for window and door;
(7) Max height and weight for crane to lift;
(8) What are the materials for roof and wall ?
- Similar Products
$510.00
10 Tons (MOQ)
Light Steel Structure H-Section Steel Beams and Columns
Shandong Zhishang Steel Co., Ltd.
$580.00
10 Tons (MOQ)
Q355 High Quality Steel Processing Formed Steel Frame
Zibo Jianda Building Material Co., Ltd.
$510.00
10 Tons (MOQ)
Hot Rolled H-Section Steel Beams and Columns
Shandong Zhishang Steel Co., Ltd.
$750.00
50 Tons (MOQ)
Welding Processing Box Column Steel Structure H Section
Shandong Zhishang Steel Co., Ltd.