$1.55
5000 Pieces (MOQ)
Aluminium Alloy Die Casting for Pillar Parts
Lituo Metal Die Casting Co., Ltd.
Swipe or use the arrows to view product images.
Premium Customized Polyurethane Vibration Isolation Pads for Enhanced Stability
| Price | $999.00 |
|---|---|
| Min Order | 1 Piece |
| Availability | In Stock |
| Shipping From | Jiangsu, China |
| Popularity | 1014 people viewed |
Model NO.:
SP 30
Color:
Fixed
Customized:
Customized
Standard:
International
Type:
Bearing
Material:
Polyurethane rubber
Thickness:
12.5/25mm
Roll:
1.5m wide, 5.0m long
Strip:
Up to 1.5m wide, up to 5.0m long
Shape:
Customized
Trademark:
THERMOTEST/OEM
Transport Package:
Carton
Specification:
Customized
Origin:
China
Product Description
Material: Mixed-celled PU elastomer (Polyurethane)
Color: Pastel green
Dimensions can be customized
PRODUCT PROPERTIES
- Pronounced damping characteristics
- Elastic polyurethane material
- Mixed-cell pore structure
- High energy absorption capacity
- Static range of use of 0.005 N/mm2 to 0.5 N/mm2
- Impact resilience of max. 16%
ADVANTAGES
- Absorb impact load types
- Ability to provide customer-specific solutions
- Calculability of the impact
- Long service life
- Finely graded range for optimum system design
Range of use | Compressive | Deformation |
| Shape factor-dependent, the specified values apply to shape factor of q=3 | ||
| Static range of use (static loads) | up to 0.012N/mm2 | approx. 2.2% |
| Impact range of use (dynamic loads) | up to 60% | |
| Load peaks (occasional, brief loads) | up to 0.5 N/MM2 | approx. 80% |
Technical Data
| Material Properties | Test Methods | Comment | |
| Mechanical loss factor | 0.48 | DIN 53513 1 | temperature-, frequency-, specific load- and amplitude-dependent |
| Impact resilience | 15 % | EN ISO 8307 1 | |
| Specific energy absorption | up to 4.9 mJ/mm2 | Getzner Werkstoffe | at a thickness of 25 mm |
| Compression hardness 3 | 0.03 N/mm2 | EN ISO 844 1 | at 10 % linear compression, 1st load cycle |
| Compression set 2 | < 5 % | EN ISO 1856 | 25 % deformation, 23 °C, 72 h, 30 min after removal of load |
| Static shear modulus 3 | 0.13 N/mm2 | DIN ISO 1827 1 | at a pretension of 0.03 N/mm2 |
| Dynamic shear modulus 3 | 0.53 N/mm2 | DIN ISO 1827 1 | at a pretension of 0.03 N/mm2, 10 Hz |
| Min. tensile stress at rupture | 0.45 N/mm2 | DIN EN ISO 527-3/5/500 1 | |
| Min. tensile elongation at rupture | 160 % | DIN EN ISO 527-3/5/500 1 | |
| Abrasion 2 | ≤ 3100 mm3 | DIN ISO 4649 1 | load 10 N |
| Coefficient of friction (steel) | ≥ 0.5 | Getzner Werkstoffe | dry, static friction |
| Coefficient of friction (concrete) | ≥0.7 | Getzner Werkstoffe | dry, static friction |
| Specific volume resistivity | > 1012 Ω·cm | DIN IEC 60093 | dry |
| Thermal conductivity | 0.043 W/mK | DIN EN 12667 | |
| Temperature range 4 | -30 °C to 70 °C | optimum damping range from 5 °C to 40 °C | |
| Flammability | class E | EN ISO 11925-2 | normal flammable, EN 13501-1 |
1Measurement/evaluation in accordance with the relevant standard
2 The measurement is performed on a densitydependent basis with differing test parameters
3 Values apply to shape factor q = 3
4 Take account of heating caused by energy conversion
· Quasi-static load deflection curve with a loading rate of 1 % of the thickness of the unloaded sample per second.
· Recording of the 1st load, with filtered starting range (in accordance with ISO 844), testing at room temperature.
· Shape factor q = 3
· Recording of the 1st load, with filtered starting range (in accordance with ISO 844), testing at room temperature.
· Shape factor q = 3
· Quasi-static modulus of elasticity as tangential modulus from the load deflection curve. Dynamic modulus of elasticity from sinusoidal excitation at a vibration velocity of 100 dBv re. 5·10-8 m/s (corresponding to a vibration amplitude of 0.22 mm at 10 Hz and 0.08 mm at 30 Hz).
· Measurement in accordance with DIN 53513
· Shape factor q = 3
· Measurement in accordance with DIN 53513
· Shape factor q = 3
· Natural frequencies of a vibratory system with a single degree of freedom, consisting of a mass and an elastic bearing made of Sylodamp® SP 30 on a rigid surface.
· Parameter: thickness of the Sylodamp®-bearing
· Shape factor q = 3
· Parameter: thickness of the Sylodamp®-bearing
· Shape factor q = 3
· Specific energy absorption from an impact load at an impact speed of up to 5 m/s.
· Drop impact test with a r ound, flat stamp, recording of the 1st load, testing at room temperature.
· Parameter: thickness of the Sylodamp®-bearing
· Drop impact test with a r ound, flat stamp, recording of the 1st load, testing at room temperature.
· Parameter: thickness of the Sylodamp®-bearing
- Similar Products
$100.00
10 Pieces (MOQ)
Customized Carbon Steel Stainless Steel Dished Head
Hebei Jutou Import and Export Trade Co., LTD
$0.22
5000 Pieces (MOQ)
Hot Sale Aluminium Holder for Lamp/Die Casting Parts
Lituo Metal Die Casting Co., Ltd.
$4.00
20 Pieces (MOQ)
Aluminum Alloy /Nylon Double Spoken Handwheel
Hebei Baisite Machinery Accessories Co., Ltd.
$2.50
20 Pieces (MOQ)
Plastic Crank Handle with Round or Square Hole
Hebei Baisite Machinery Accessories Co., Ltd.