Swipe or use the arrows to view product images.
Processless Development on Press Aluminum Thermal CTP Plate for Offset Printing
| Price | Negotiable |
|---|---|
| Min Order | 500 Square Meters |
| Availability | In Stock |
| Shipping From | Zhejiang, China |
| Popularity | 428 people viewed |
Model NO.:
ECOO-G
Material:
Aluminum
Usage:
Offset Printing
Type:
CTP Plate
Style:
Negative
Spectral Sensitivity:
800-850nm
Run Length:
100, 000 Impressions
Gauges:
0.15mm, 0.3mm
Shelf Life:
12 Months
Coating Color:
Light Gray
Safe Light:
Dark Room Yellow Light
Low-Energy Imaging:
Maximum Width 1280 mm
Processing:
Without Processing, Directly on Press
Trademark:
EcooGraphix
Transport Package:
Standard Exporting Wooden Pallet
Specification:
Not wider than 1350mm in width
Origin:
China
HS Code:
3701302400
Product Description
Printing Plate Chemistry Free DOP Thermal Offset CTP Plate ECOO-G
1.Application
EcooGraphix Ecoo-G is a new, environmentally friendly, development on press CTP plate. It can be run directly on a printing press after imaging, without a need for chemical processing.
2.Characteristic
ECOO-G is double layer, and the emulsion layer will not dissolve into water, so it will not integrate into fountain solution; while the protection layer is well water-soluble, and it will be easy dissolved into the fountain solution.
EcooGraphix Ecoo-G is a new, environmentally friendly, development on press CTP plate. It can be run directly on a printing press after imaging, without a need for chemical processing.
2.Characteristic
ECOO-G is double layer, and the emulsion layer will not dissolve into water, so it will not integrate into fountain solution; while the protection layer is well water-soluble, and it will be easy dissolved into the fountain solution.
3. ECOO-G Technical Features
-Sensitive wavelength (nm): 800-850nm
-Coating color: Light gray
-Sensitivity(my/cm2): 150my/cm2
-Exposure in safe light: White light 1 hour; yellow light 24 hours
-After image contrast: Can be spotted by eyes, but auto punching machine cannot recognize it
-Imaging device: Normal thermal CTP device
-Resolution: 1-99% @ 200lpi (dependent on CTP capability)
-Run-length: 100,000 impressions
-Storage: 12 month (under recommend environment)
| Plate Technical Specification | |
| Model | ECOO-G |
| Plate Type | Non-ablation thermal-negative type |
| Application | High grade commercial and newspaper printing |
| Substrate | Electrolyte graining and Anodized AL substrate |
| Thickness | 0.15mm / 0.30mm |
| Spectrum scope | 800-850nm |
| Platesetter | Various dominant thermal platesetters in the market |
| Low-energy imaging | 130-150 mj/ m² |
| The period of latent image stabilization | ≤7 days |
| Recommended screen method | 1-99% @200 LPI AM or 20μm FM or mixture |
| The paper number of start-up | <50 sheets |
| Safety light | 4 hours under yellow light; 1 hour under fluorescent lamp; Direct exposure under natural light is safe but not recommended. |
| Processing | Without processing, directly on press |
| Run Length | 100,000 impressions, actual run length depends on printing conditions |
| Baking | No recommended |
| Maximum short grain width | Maximum width 1280 mm |
| Photosensitive wave length | 830 nm |
| Coating color | Grey |
| Shelf life | 12 months under recommended condition |
| Transportation | Packed in seal and stored by means of prevention |
| from light, moisture, overheat and high humidity | |
| Storage | Recommended condition: 18ºC-24ºC, 40%-50% RH. |
| Data | Kodak trendsetters | LOTTEM 400(TH1.7) | MAGNUS 400 | Screen 8600S |
| Laser power | 15- 17W | 300-320mw | 19.5-21.5W | 80-90 % |
| Drum speed | 250-300rpm | 850-900rpm | 400-450rpm | 800-900rpm |
| Resolution | Customized | Customized | Customized | Customized |
| Parameter that | Focus/ | Focus/ | Focus/ | Focus/ |
| need set up | Zoom | Zoom | Zoom | Zoom |
Q1: Can I get the sample?
A: We are very glad to provide some sample for you to test. We usually provide 5-15pieces plates for free,but sincerely hope to get your kind support for the air courier freight. This cost can be returned to you in your first order.
Q2: What is the cost for the CTP plate sample freight?
A: The Air freight depends on the packing size and weight, and the delivery destination. Or you can arrange the Pick-up service from your local agent.
Q3: How long can the sample be ready?
A: It usually takes about 3days to prepare the sample.
Q4: Can I visit your factory?
A: You are warmly welcomed to visit our factory! Our company is in Hangzhou city,which is about 1.5 hour by train from Shanghai.
Q5: How many Square Meters CTP plates can feed one 20' container?
A: About 20000-25000SQM
Q6: Can I take my own brand and label on the packing?
A: Yes, we can provide the OEM with the customer's brand and label.
- Similar Products
Negotiable
1000 Square Meters (MOQ)
Ecoographix Double Layer Solvent Resistent Thermal CTP Plate
Hangzhou Ecoographix Digital Technology Co., Ltd.
$60.00
100 Square Meters (MOQ)
2.28mm Photopolymer Flexo Plate, Flexographic Plate
Suzhou Aolide Co.,Ltd
$52.00
100 Square Meters (MOQ)
Hot Sale 2.54mm Photopolymer Flexographic Printing Plate
Suzhou Aolide Co.,Ltd
$10000.00
1 Piece (MOQ)
Laser Engraving Ceramic Anilox Roll for Flexo Orrugated Paper Printing
Kunshan Hanhan Co., Ltd.
$61.00
100 Square Meters (MOQ)
1.7mm Photopolymer Flexo Plate for Printing, Flexographic Plate
Suzhou Aolide Co.,Ltd