Swipe or use the arrows to view product images.
Purell LDPE 2410t PE3020d PE1840h PE3420f Medical Grade Low Density Polyethylene Plastic Raw Materials Granules LDPE Resin for Medical Film Vials Botles Caps
| Price | $850.00 |
|---|---|
| Min Order | 1 Ton |
| Availability | In Stock |
| Shipping From | Hebei, China |
| Popularity | 365 people viewed |
Model NO.:
LDPE
Carrier:
LDPE
Color:
White
Appearance:
Transparent Granules
CAS No.:
9002-88-4
Material:
Low Density Polyethylene/LDPE
Plastic Forming Method:
Injection Molding, Extrusion Molding, Compouding
Application:
Film, Shopping Bags, Stretch Film
Process Grade:
Blow Molding
Plastic Properties After Heated:
Thermoplastic Plastics
Model:
Ld605 Ld608 1c7a Ld100AC 1I60A Ld607
Package:
25kg/Bag
Transport Package:
25kg/Bag
Specification:
VIRGIN
Origin:
China
HS Code:
3901100090
Product Description
Product Description
Low density polyethylene, also known as high pressure polyethylene (LDPE), is the lightest variety of polyethylene resin, is milky, tasteless, odorless, non-toxic, non-glossy surface waxy particles. It has good softness, extensibility, electrical insulation, transparency, workability and certain air permeability. Its chemical stability performance is good, alkali resistance, resistance to general organic solvents.
Characteristic:
(1) The film is a micro milky transparent color, soft.
(2) cold resistance, low temperature resistance and high temperature resistance.
(3) Good moisture-proof performance, stable chemical performance, insoluble in general solvents.
(4) large air permeability.
(5) poor oil resistance, products can be slowly dissolved.
(6) long-term ultraviolet and thermal action will be aging, affecting its physical properties and dielectric properties.
(7) The melt is prone to degradation when it comes into contact with oxygen.
Film Grade
Blow Grade
Injection grade
(1) The film is a micro milky transparent color, soft.
(2) cold resistance, low temperature resistance and high temperature resistance.
(3) Good moisture-proof performance, stable chemical performance, insoluble in general solvents.
(4) large air permeability.
(5) poor oil resistance, products can be slowly dissolved.
(6) long-term ultraviolet and thermal action will be aging, affecting its physical properties and dielectric properties.
(7) The melt is prone to degradation when it comes into contact with oxygen.
Film Grade
| Item | Test condition | Test Method | Value | Unit |
| Density | ISO 1183 | 0.944-0.955 | g/cm3 | |
| MFR | 190°C/2.16kg | ISO 1133 | 0.03-0.07 | g/10min |
| Tensile strength at yield | ISO 527-2 | 22 | MPa | |
| Elongation at break | ISO 527-2 | >350 | % | |
| ESCR | F50,50°C,100% | ASTM D-1693A | 1000 | h |
| VICAT | ASTM D-1525 | 126 | °C |
Blow Grade
| Item | Test Condition | Test Method | Value | Unit |
| Density | ISO 1183 | 0.950~0.955 | g/cm | |
| MFR | 190°C/2.16kg | ISO 1133 | 1.7~2.5 | g/10min |
| Tensile strength at yield | ISO 527-2 | 24 | MPa | |
| Elongation at break | ISO 527-2 | >600 | % |
Injection grade
| Item | Test Condition | Test Method | Value | Unit |
| MFR | 190°C/2.16kg | ASTM D-1238 | 20 | g/10min |
| Density | --- | ASTM D-792 | 0.954 | g/cm3 |
| Tensile strength at yiled | --- | ASTM D-638 | 28 | MPa |
| Elongation at break | --- | ASTM D-638 | 250 | % |
| Impact tensile strength | --- | ASTM D-1822 | 42 | kJ/m2 |
| ESCR | ASTM D-1693 | 3 | --- | |
| VACIT | --- | ASTM D-1525 | 127 | °C |
Widely used in Pipe,plastic products,bottles,wire and cable,etc.
1) For sample order, products is usually to shipping by UPS, FEDEX or DHL and so on.
2) For regular order, shipments can be arranged by sea, air, door to door , express or economy.
Let us know your requirement, we'll try to save your budget and meet deadine.
- Similar Products