Swipe or use the arrows to view product images.
Quick Drying Ms Polymer Strong Adhesive Modified Silicone Ms Polymer Adhesive
| Price | $3.20 |
|---|---|
| Min Order | 2000 Pieces |
| Availability | In Stock |
| Shipping From | Fujian, China |
| Popularity | 389 people viewed |
Model NO.:
MS-1314
CAS No.:
75009-88-0
Bonding Function:
Structural Adhesive
Morphology:
Paste
Application:
Construction, Woodworking, for Rock Slab, Tile, Stone, Metal, Bamboo, Wood, P
Material:
Silicone
Classification:
Room Curing
Main Agent Composition:
Modified Silane
Characteristic:
Weatherability
Promoter Composition:
Tackifier
Composition:
Organic Material
Color:
Grey
Component:
One Component
Curing Conditions:
Moisture Curing
Colors:
White/Grey/Black
Feature1:
Formaldehyde-Free
Feature2:
Strong Adhesion
Feature3:
Strong Aging Resistance
Trademark:
AEP
Transport Package:
Carton
Specification:
280ml/300ml/310ml/590ml/600ml
Origin:
Xiamen, China
HS Code:
3214109000
Product Description
About Products :
A one-component strong slate adhesive based on Polyether modified silane, which has good bonding properties to metal, stone, wood, glass, some ABS plastics and other materials.
The main purpose :
Mainly used for bonding rock slab countertops, background walls, marble, kitchen cabinets, etc.
A one-component strong slate adhesive based on Polyether modified silane, which has good bonding properties to metal, stone, wood, glass, some ABS plastics and other materials.
The main purpose :
Mainly used for bonding rock slab countertops, background walls, marble, kitchen cabinets, etc.
| MS Structural Adhesive - TDS Forms | ||||||||||
| Test items | Technical indicators | Note | ||||||||
| Appearances | Colors | Black/White/Grey | Colours can be customised | |||||||
| State | Delicate cream | Visual assessment | ||||||||
| Density | g/cm³ | 1.4±0.1 | GB/T14683.2 | |||||||
| Extrusion rate | ml/min | ≥450ml/min | GB/T 13477.3 | |||||||
| Shifting | vertical sag | ≤1mm | GB/T 13477.6 | |||||||
| Curing speed | Surface drying time | 40~100min | GB/T 13477.6 | |||||||
| Initial 24 hour cure depth | ≥2mm | |||||||||
| Hardness | Shore A | 50±5A | GB/T531-2008 | |||||||
| Tensile Stress Strain | Tensile strength(TS) | ≥0.75Mpa | GB/T14683.8 | |||||||
| 100% Tensile strength(M100) | About 0.30 Mpa | |||||||||
| Elongation at break EB (%) | ≥400% | |||||||||
| Elastic recovery rate | According to the 25LM class | ≥75% | GB/T13477.17 | |||||||
| Constant elongation bonding | Substrate: Concrete mortarboard | Non-destructive | GB/T 13477.10 | |||||||
| Adhesion after cold pulling and hot pressing | Substrate: Concrete mortarboard | Non-destructive | GB/T 13477.13 | |||||||
| Elongation bonding after immersion in water | Substrate: Concrete mortarboard | Non-destructive | GB/T 13477.14 | |||||||
| Curing Shrinkage | Quality loss rate | ≤3% | GB/T 13477.19 | |||||||
Instructions for use
1.Before construction, the grass-roots level will be cleaned up, no dust, oil and other substances that affect the bonding strength.
2.This product can be used for spot gluing, the spot gluing area should be not less than 10% of the pasted area; you can also use the following 4mm tooth-shaped trowel to pull the teeth of the full scraping and paving, after the completion of the adhesive layer thickness of up to 3mm is good.
3.Adjustment should be completed within ten minutes after dispensing.
4.The product room temperature curing, surface drying time: 45Min, full curing time: 72h.
5.Application temperature range: -40ºC-+100ºC.
Precautions
1.Prohibit contact with water, steam, alcohol solvents (such as alcohol).
2.Construction temperature of 5-32 ºC is preferred.
3.We should wear gloves, masks, etc. for protection when using to prevent allergic reactions.
4.in order to prevent the liquid into the eyes caused by allergies, you can wear an eye mask when dispensing.
5.After construction, it is advisable to wash hands before drinking or eating to avoid ingesting glue components.
6.The product should be stored in a ventilated, dry, cool place, prevent direct sunlight, storage temperature 8-28 ºC.
Features:
1.Formaldehyde-free
2.Waterproof and mildew proof
3.Fast cure
4.High hardness
5.Strong adhesion
6.High tensile strength
7.Strong aging resistance
1.Formaldehyde-free
2.Waterproof and mildew proof
3.Fast cure
4.High hardness
5.Strong adhesion
6.High tensile strength
7.Strong aging resistance
The company takes customer as the centre, quality as the fundamental, innovation as the vitality, and is committed to developing into an adhesive enterprise trusted by customers. We have won the honours of National High-tech Enterprise, Xiamen High-tech Enterprise, Growing Enterprise, Speciality and New Enterprise, Intellectual Property Demonstration Enterprise, New Material Enterprise, and Demonstration Enterprise of Scientific and Technological Project Products.
A1.:Sure,We can provide you free samples.
Q2.:How to find the most suitable product for me?
A2.:Please tell us about the use or application of the adhesive you are purchasing, and we will recommend the right adhesive for you.
Q3.:Can you provide OEM service?
A3.:Yes, we can provide you with OEM service to customise your own branding and outer packaging.
Q4.:What is your delivery time?
A4.:For OEM order,delivery in 20-30 days.
Q5.:What is your terms of payment?
A5.:30% deposit in advance,70% paid in before shipment.
Q6.:What is the shelf life of your product?
A6.:12 months.
- Similar Products