Rapid Test Kit Assembly and Packing Machine Automatic Rapid Test Cassette Assembly Machine Manufacturer

• The vibrating pan with sound-proof shade starts loading bottom caps at a rate of 70-90 per minute. The products are always available to be put in the loop fixture.

• The bottom caps are put in the loop fixture, and moved to the position of the first reagent strips.
• The cutting machine cuts the long strip reagent board into appropriate reagent strips. Then reagent strips will be tested for size and cleanliness through the CCD camera.
• After the test, the mechanical screw module will put qualified reagent strips in bottom caps.

• The bottom caps with the first reagent strips are moved to the position of the second reagent strips.
• The reagent strips hang. And servo motor loads long strip reagent boards.
• The cutting machine cuts the long strip reagent board into appropriate reagent strips. Then reagent strips will be tested for size and cleanliness through the CCD camera.
• After the test, the mechanical screw module will slowly put qualified reagent strips in bottom caps

• The qualified reagent kits are moved to the conveyor line of the packing machine.

• The unqualified reagent kits are put in the defective warehouse.

• The desiccant and vibrating pan load with sound-proof shade. The products pass the belt line and enter into pre- in-bag fixture in order.
• Then the part of bagging process is ready. 

• Bag loading machine put aluminum foil bags on the bag loop line, and open the bags which is convenient for testing cards and desiccant to enter into.

• Packing machine: Inductor detection.
• The inductor in the packing machine detects the bags.
• If a bag has both testing cards and desiccant, it will be push-in packed.
• If not, it will be rejected.

•  You can control the temperature depending on the thickness of the aluminum foil bags.
Eleventh step: the final product, reject defective products
•  All processes of the product are completed. The defective products will be rejected.
•  You can make a belt line at the last position.
                               Defective product recovery zone.                                                                              There are a belt line at the last position in accordance with requirements and a ink-jet printer. The printer can print the date of manufacture and the batch number.