Menu
Global B2B sourcing platform
Verified suppliers and manufacturers

River Dredging System Solid Liquid Separator Sludge Thickening and Dewatering Machine

Price $10000.00
Min Order 1 Set
Availability In Stock
Shipping From Shandong, China
Popularity 284 people viewed
Model NO.:
QD-EVU-20
After-sales Service:
Yes
Warranty:
1 Year
Type:
Sludge Dewatering Machine
Method:
Combined Treatment
Usage:
Industrial
Condition:
New
Service Life:
20 Years
Motor:
Sumitomo Nissei Sew
After-Sale Service:
Long Term
Material:
SS304 SS316
Advantage:
Clog Free
Operation:
Automatic
Capital Investment:
Low
Operation Cost:
Less
Design:
Customize
Sludge Cake Water Content:
85%
Dried Sludge:
10-30kg/H
Volage:
220V 380V 415V
Supporting Machine:
Chemical Dosing Machine
Trademark:
Spark
Transport Package:
Standard Shipping Package
Specification:
4.5m*1.65m*2.13m
Origin:
Qingdao China
HS Code:
8421219990
Product Description
Company Profile

QDEVU SLUDGE DEWATERING MACHINIE

Welcome to our website, a technical information source for sludge treatment and the end disposal of waste sludge solids.

So, what is sludge processing? Watch our brief introduction to sludge treatment ...

Product Description

WHAT IS THE SLUDGE ?
Sludge is the main waste stream generated from water purification, both water for drinking and wastewater for environmental discharge. It requires processing to reduce its volume (and so the cost of subsequent haulage and disposal), as well as the risk it poses to public health, and more
SCREW PRESS SLUDGE TREATMENT PLANT
EVU SLUDGE  DEWATERING MACHINE ADVANTAGES
 
Low operation cost: less than 40% of that of belt filter press, and less than 20% of that of centrifugal dewaterer;
Power saving: less than 5% of that consumed by the centrifugal dewaterer; water saving: less than 0.1% consumed by the belt filter press; and medicine saving: saved by 60%
Small volume: save the investment into dewatering room; non-blocking: the strong opponent against oil and fiber sludge;
SLUDGE TREATMENT PROCESS
Multi-disk screw press, also known as MDS dewatering press, is a kind of cutting edge sludge dewatering equipment with non-clogging design and low energy consumption, especially applicable for oily sludge.
Product Parameters

QDEVU DEWATERING MACHINE PARAMETER
MODELDS STANDARD CAPACITY (KG/H)FLOW LOAD (M3/H)
LOW CONCENTRATIONHIGH CONCENTRATION2000MG/L10000MG/L20000MG/L30000MG/L50000MG/L
QDLX-131426260.60.50.870.4
QDLX-132852521.21.01.730.8
QDLX-201852521.21.01.730.8
QDLX-202161041042.42.03.471.6
QDLX-301201301303.02.54.332.0
QDLX-302402602606.05.08.674.0
QDLX-303603903909.07.5136.0
QDLX-351402602606.05.08.674.0
QDLX-35280520520121017.38.0
QDLX-35312078078018152612
QDLX-35416010401040242034.6816
QDLX-402135884884201729.513.6
QDLX-403200132613263025.544.220.4
QDLX-40426617681768403458.927.2

Dewatering Principle
The initial section of dewatering drum is the thickening zone, where the solid-liquid separating process takes place and where the filrate will also be discharged.The pitch of the screw and the gaps between the rings decrease at the end of dewatering drum, hence increasing its internal pressure. At the end, the end plate further increases the pressure, so as to discharge dry sludge cake.

MAIN FEATURES & COMPARISON


SCREW PRES SLUDGE DEWATERTING APPLICATION
---PAPER MAKING
---LEATHER PROCESSING 
---PHARMACY INDUSTRY
---PRINTING & DYEING
---CHEMICAL INDUSTRY
---ELECTROPATING INDUSTRY
---MUNICIPAL PROCESSING
 
Certifications

 




  • Similar Products
Full Page Contact Supplier