Swipe or use the arrows to view product images.
Rope Pull Switch Conveyor Belt Protection Device Automatic Pull Cord Switch
| Price | $30.00 |
|---|---|
| Min Order | 1 Piece |
| Availability | In Stock |
| Shipping From | Zhejiang, China |
| Popularity | 389 people viewed |
Model NO.:
KLT2-II
Product Name:
Automatic Pull Cord Switch
Model:
Klt2-II
Angle of Action:
30°
Limit Angle:
60°
Resetting Pressure:
≥40g
Ambient Temperature:
-30°-+60°
Reset Mode:
Automatic Reset
Relative Humidity:
≥85%
Protection:
IP65
Trademark:
WOENELE
Transport Package:
Cartons
Specification:
3KG
Origin:
Zhejiang, China
Product Description
Pull cord switch is widely used in iron and steel, cement, power plants, mines and other factories with belt conveyor, The product is installed on both sides of the belt conveyor, is a kind of protective switch for emergency shutdown ofthe belt conveyor, pull the wire rope at any point within the operaling distance of the switch, cut off the running circuit to stop the whole line, to achieve the protection of the belt conveyor and personal safety.
Working principle:
When an emergency occurs at the belt transport site, pull the wire rope tied to the lifting lug to make the slider and switch in the machine function and send out a stop signal. Release the wire ropeand press the reset bar before.
Installation And Use:
The switch is balanced on the fixing bracket of the frame:Tie the wire rope to the pull ring at the upper and lower ends of the pull rope switch, and the wire rope on each side shall not exceed 40m(it shall be shortened to 25 meters when there is a slope);The rope pressure should be suitable to ensure the reliable reset of the switch:The pulling rope is arranged in the parallel direction of the tape,and a lifting ring is added every 3 meters:
Product Parameters :
| Product Name | Automatic Pull Cord Switch | Model | KLT2-II |
| Angle of action | 30° | Ambient temperature | -30°~+60°C |
| Limit Angle | 60° | Reset Model | Automatic Reset |
| Relative humidity | ≥85% | Limit Angle | 60° |
A1: Yes,we accept.OEM/ODM has a MOQ requirement.
Q2: Can we get samples ?
A2: Yes,you can get sample to test quality,but the freight for express is on buyer's account.
Q3: What's the payment term ?
A3:T, Western Union, MoneyGram,Paypal etc.
Q4: How's the delivery time ?
A4: Normally is 3-10 work days, lf the quantity is large,We need to negotiate.
Q5: What is the standard of package ?
A5:Normally are cartons, but also we can pack it according to requirement.
Q6: Could you offer Form E, C/O etc ?
A6: Sure, We can apply to CCPIT.
Q7: Are you a trading company or a manufacture ?
A7:We are the manufacturer& exporter in the industry so we can supply product for you with factory price.
- Similar Products
Negotiable
10 Pieces (MOQ)
Rdcps1 Motor Phase Failure Phase Sequence Protect Motor Circuit Breaker
Radin Electric Technology Co., Ltd.
$25.00
100 Pieces (MOQ)
Line Cesi Certified Fuse Cutout for Transmission
YUEQING REACON ELECTRIC CO., LTD.