Swipe or use the arrows to view product images.
Rubber Tracks 18" 25" 30" 36" for Tractor, Harvesters, Excavator, Agriculture
| Price | $350.00 |
|---|---|
| Min Order | 1 piece |
| Availability | In Stock |
| Shipping From | Shandong, China |
| Popularity | 353 people viewed |
Model NO.:
QD
Type:
Crawler
Usage:
Harvester, Excavator
Material:
35mnb 50mn
Warranty:
1 Year
Track Type:
Rubber Track/ Steel Track
Travel Speed:
3-8km/H
Certification:
CE, ISO9001: 2000
Color:
Black
Condition:
New
Keywords:
Undercarriage for Drilling Machine
Quality:
Genuine Quality
Delivery Time:
Usually Within 3 Days After Payment Receipt
Trademark:
QINDING
Transport Package:
Wood Pallet
Specification:
1ton~45ton
Origin:
China
HS Code:
8431499900
Product Description
1. Rubber tracks cause less damage to roads than steel tracks, and less rutting on soft ground than steel tracks.
2. A benefit to equipment operating in congested areas, rubber tracks make less noise than steel tracks.
3. Rubber tracks permit machines to travel at a higher speed than steel tracks.
4. Rubber tracks insulated machine and operator from vibraion, exteding the service life of machine and decreasing operator's fatigue.
5. The ground pressure of rubbr tracks equipped machinery can be fairly low, about 0.14-2.30 kg/m2, a major reason for its use on wet and soft terrain.
6. The added traction of rubber tracked vehicles permits them to pull twice the load of wheeled vehicles of the same weight.
7. Rubber tracks' pulling performance being twice that of wheels, it permits the lighter vehicles equip with rubber track to do the same pulling work than that of wheeled vehicles.
1. Adjust the tension of the rubber crawler so that the height, the variable range is 10-20mm when the machine is lifted. Readjust when the tension decreases. (Be careful because the rubber crawler may come off if the tension is too low).
2. Avoid projection from the frame around the rubber crawler, especially on its inner circumference. (Rubber crawlers are easily deformed; If it comes into contact with the frame, an accident such the rubber being cut can occur).
3. Avoid sharp projections when traveling.
4. Avoid turning too fast on concrete roads with a high coefficient of frction because this can cause accidents such as cutting the rubber.
5. Be careful that no oil, etc adheres to the rubber track. If it does, wipe it off immediately.
6. When storing for long periods, keep indoors, away from direct sunshine and rain.
7. Replace as soon as possible when abrasion of sprockets is observed.
| Width*Pitch(mm) | Pitch number | Width*Pitch(mm) | Pitch number | Width*Pitch(mm) | Pitch number |
| 130*72 | 28-53 | KB300*52.5 | 72-92 | 400*74 | 68-76 |
| 150*60 | 28-49 | KB300*52.5N | 72-98 | 400*75.5K | 74 |
| 150*72 | 29-40 | JD300*52.5N | 72-98 | B400*86 | 52-55 |
| 170*60 | 30-40 | 300*53K | 80-84 | 400*90 | 42-56 |
| 180*60 | 30-40 | 300*55 | 70-86 | Y400*107K | 46 |
| 180*72 | 30-58 | 300*55.5K | 76-82 | K400*142 | 36-37 |
| 180*72K | 30-37 | 300*71K | 72-55 | 400*144 | 36-41 |
| B180*72K | 34-51 | 300*109N | 25-42 | Y400*144K | 36-41 |
| B180*72A | 30-51 | 300*109W | 35-44 | 420*100 | 50-58 |
| H180*72 | 30-50 | K300*109 | 37-41 | 450*71 | 76-88 |
| 190*60 | 30-40 | 300*109WK | 35-42 | DW450*71 | 76-88 |
| 190*72 | 34-39 | B300*84 | 78-52 | 450*73.5 | 76-84 |
| 200*72 | 34-47 | T300*86K | 48-52 | 450*76 | 80-84 |
| 200*72K | 37-47 | 320*52.5 | 72-98 | 450*81N | 72-80 |
| 230*48 | 60-84 | B320*52.5 | 68-98 | 450*81W | 72-78 |
| 230*48K | 60-84 | 320*54 | 70-84 | KB450*81.5 | 72-80 |
| 230*72 | 42-56 | B320*55K | 77-98 | K450*83.5 | 72-74 |
| 230*72K | 42-56 | B320*84 | 50-53 | Y450*83.5K | 72-74 |
| 230*96 | 30-48 | T320*86K | 48-52 | B450*84 | 53-56 |
| 230*101 | 30-36 | B320*86 | 49-52 | B450*86 | 52-55 |
| 250*47K | 84 | 320*90 | 52-56 | 450*90 | 58-76 |
| 250*48.5K | 80-88 | 320*100 | 38-54 | KU450*90 | 58-76 |
| 250*52.5K | 72-78 | 320*100W | 37-65 | T450*100K | 48-65 |
| 250*52.5 | 72-78 | Y320*106K | 39-43 | K450*163 | 38 |
| 250*72 | 47-57 | 350*52.5 | 70-92 | 485*92W | 74 |
| B250*72 | 34-60 | 350*54.5K | 80-86 | 500*90 | 76-82 |
| B250*72B | 42-58 | B350*55K | 77-98 | 500*92 | 72-84 |
| E250*72 | 37-58 | 350*56 | 80-86 | 500*92W | 78-84 |
| 250*96 | 35-38 | 350*75.5K | 74 | 500*100 | 71 |
| 250*109 | 35-38 | 350*90 | 42-56 | K500*146 | 35 |
| 260*55.5K | 74-80 | 350*100 | 46-60 | 600*100 | 76-80 |
| Y260*96 | 38-41 | 350*108 | 40-46 | 600*125 | 56-64 |
| 260*109 | 35-39 | 350*109 | 41-44 | 700*100 | 80-98 |
| 280*72 | 45-64 | Y370*107K | 39-41 | 750*150 | 66 |
| Y280*106K | 35-42 | 400*72.5N | 70-80 | 800*125 | 80 |
| 300*52.5N | 72-98 | 400*72.5W | 68-92 | M800*150 | 66-68 |
| 300*52.5W | 72-92 | Y400*72.5K | 72-74 | K800*150 | 67-70 |
| 300*52.5K | 72-84 | KB400*72.5K | 68-76 | 1000*150 | 86 |
| 300*52.5KW | 72-92 | 400*72.5KW | 68-92 |
QINDING Manufactures a wide range of Undercarriage Parts & Components including:
- Track Chains (Standard, Heavy Duty & "PPR" Series)
- Forged and Cast Drive Segments
- Drive Sprockets
- Idlers
- Lower Rollers
- Carrier Rollers
- Track Tensioning Assemblies and Components
- Heavy Duty Forestry Roller and Idlers
OUR SERVICE
Pre-sale Service
Excavator spare parts in full-scale are available;
100% quality assurance, develop and manufacture follow original ones;
Quick response within 24 hours ;
Sale Service
Small order allowed;
Reasonable Price and timely delivery;
Original packing, neutral packing or customized packing;
After -Sales Service
Positive customer feedback from abroad market;
Excellent After-sales service.
- Similar Products
$8.00
100 Pieces (MOQ)
Excavator Spare Parts Bucket Teeth Dozer Bucket Teeth
Yancheng Prosperity Technology Co., Ltd