Swipe or use the arrows to view product images.
SCR DC Governor 180V 220V 110V DC Motors Controller 20 AMPS Brushed Motor Drivers
| Price | $210.00 |
|---|---|
| Min Order | 1 Piece |
| Availability | In Stock |
| Shipping From | Shandong, China |
| Popularity | 522 people viewed |
Model NO.:
LK220DR20BL
Task:
Adjust
Structure:
Open-Loop
Signal:
Continuous
Function:
Automatic Control, Protection, Monitoring, Measurement
Condition:
New
Customized:
Customized
Adapter Motor:
Brushed DC Motor
Trademark:
Lulanjiu
Transport Package:
Carton
Origin:
China
HS Code:
8543709990
Product Description
For the specific instructions of the SCR DC governor, please contact the staff
Using SMT technology, small size
Suitable for permanent magnet, separately excited and DC torque motors
Provide alarm output function
Double closed-loop P I regulation (voltage and current closed-loop)
Current setting
Torque compensation function
Soft start time setting function
10k potentiometer, standard signal input 0-5V, 0-10V (need to support external VID)
Can realize remote start and stop, good followability and fast response
Wide speed control ratio and hard mechanical properties
two. technical parameter
Input voltage AC: 110V / 220V±10%
Frequency: 50/60HZ±5%.
Output voltage DC: 0-90V 0-110V 0-160V 0-180V 0-220V
Rated excitation current: (DC100V or 200V) 3-5A
Rated output current: 20A
Speed ratio: 1:80
Output voltage accuracy: ≤0.1%
Ambient temperature: -25ºC- +70ºC
Ambient humidity: ≤80%. (No condensation)
Insulation withstand voltage: Input terminal and shell 1500V DC for 1 minute
Insulation resistance: > 20 MΩ
Leakage current: ≤ 0.9 mA
Dimensions: 152 * 120 * 63 mm
Weight: 1.25Kg
3. Product performance:
1. It has relatively hard mechanical properties, and the static difference rate is 1%.
2. It has a wide range of speed regulation, (0-maximum).
3. Has a faster dynamic response process.
4. Has automatic smooth transitions when accelerating.
5. Better excavator characteristics can automatically limit the overload current to the set value current.
6. High reliability, compact structure, and high cost performance
4. Dimensions: 152 * 120 * 63 mm as shown in Figure 1
Using SMT technology, small size
Suitable for permanent magnet, separately excited and DC torque motors
Provide alarm output function
Double closed-loop P I regulation (voltage and current closed-loop)
Current setting
Torque compensation function
Soft start time setting function
10k potentiometer, standard signal input 0-5V, 0-10V (need to support external VID)
Can realize remote start and stop, good followability and fast response
Wide speed control ratio and hard mechanical properties
two. technical parameter
Input voltage AC: 110V / 220V±10%
Frequency: 50/60HZ±5%.
Output voltage DC: 0-90V 0-110V 0-160V 0-180V 0-220V
Rated excitation current: (DC100V or 200V) 3-5A
Rated output current: 20A
Speed ratio: 1:80
Output voltage accuracy: ≤0.1%
Ambient temperature: -25ºC- +70ºC
Ambient humidity: ≤80%. (No condensation)
Insulation withstand voltage: Input terminal and shell 1500V DC for 1 minute
Insulation resistance: > 20 MΩ
Leakage current: ≤ 0.9 mA
Dimensions: 152 * 120 * 63 mm
Weight: 1.25Kg
3. Product performance:
1. It has relatively hard mechanical properties, and the static difference rate is 1%.
2. It has a wide range of speed regulation, (0-maximum).
3. Has a faster dynamic response process.
4. Has automatic smooth transitions when accelerating.
5. Better excavator characteristics can automatically limit the overload current to the set value current.
6. High reliability, compact structure, and high cost performance
4. Dimensions: 152 * 120 * 63 mm as shown in Figure 1
- Five, wiring requirements:
1. Do not connect the wires with electricity.
2. Please select insulated wires, shielded wires that match the voltage and current of the driver.
Connection, the specification selection of the power input wire of the driver and the motor connection wire, please follow the
Follow the table below: see Table 1
- Wire gauge and length table:
Drive workshop and equipment
- Similar Products