Swipe or use the arrows to view product images.
SGS Supplier Inch Size Polishing Solid Tungsten Carbide Rod
| Price | $5.00 |
|---|---|
| Min Order | 1 Piece |
| Availability | In Stock |
| Shipping From | Jiangxi, China |
| Popularity | 275 people viewed |
After-sales Service:
Yes
Condition:
New
Certification:
CE, RoHS, GS, ISO9001
Standard:
DIN, ASTM, GOST, GB, JIS, ANSI, BS
Customized:
Customized
Material:
Alloy
Application:
Metal Recycling Machine, Metal Cutting Machine, Metal Straightening Machinery, Metal Spinning Machinery, Metal Processing Machinery Parts, Metal forging Machinery, Metal Engraving Machinery, Metal Drawing Machinery, Metal Coating Machinery, Metal Casting Machinery
Product Type:
Rod
Material:
Alloy, Tungsten Carbide
Carbon Content:
Na
PCD:
Depend on Grades
Et:
N/a
Hole:
0
Trademark:
Grand Sea
Transport Package:
in Plastic Box
Specification:
330mm, 310mm, 100mm...customized
Origin:
China
HS Code:
8209002900
Product Description
SGS supplier Inch Size Polishing Solid Tungsten Carbide Rod
Grand Sea Cemented Carbide made tungsten carbide rod which is hard and tough, is the raw material of producing the alloy cutting tools such as end milling cutter, drill and reamer. These cutting tools are widely used for metal processing..
Tungsten carbide rod in Inch size, common diameter size in inch available: 1/8, 3/8, 1/4,3/4, 1/2, 1. common length in inch available: 1, 1.5, 2.5, 3, 3.5, 4, 5.6...13
Grand Sea Cemented Carbide Rods have good reputation in USA, EU, Japenese and Korea makert.
Grand Sea Grade Recommandation
Application
The Specification Range of extruded Grounded Tungsten Carbide Rod :
WC Grain size range: 0.3~0.5μ.m; 0.5~0.9μ.m; 1.0~1.3μ.m; 1.4~2.0μ.m.
Length range:3mm-600mm; (General Length: 100mm,300mm,320mm,330mm)
Diameter Grade: h4(H4), h5(H5), h6(H6), h7(H7), h8(H8), h9(H9), etc.
Good grinding machine to ensure the sphencity & the Linearity of rod at higher level standard;
Sphericity tolerance range: 0.001mm ~ 0.005mm;
Linearity tolerance range: 0.001mm~0.1mm;
Surface Roughness can be reached to: RA0.04.(reach a mirror effect surface after fine grinding)
Grand Sea Cemented Carbide made tungsten carbide rod which is hard and tough, is the raw material of producing the alloy cutting tools such as end milling cutter, drill and reamer. These cutting tools are widely used for metal processing..
Tungsten carbide rod in Inch size, common diameter size in inch available: 1/8, 3/8, 1/4,3/4, 1/2, 1. common length in inch available: 1, 1.5, 2.5, 3, 3.5, 4, 5.6...13
Grand Sea Cemented Carbide Rods have good reputation in USA, EU, Japenese and Korea makert.
Grand Sea Grade Recommandation
| Grade | WC % | CO % | Grain size (um) | Density (g/cm³)±0.1 | Hardness (HRA)±0.5 | TRS (kgf/mm²) |
| H09U | 91 | 9 | 0.3 | 14.5 | 93.7 | >350 |
| H12U-T | 88 | 12 | 0.3 | 14.2 | 93 | >350 |
| H06U-T | 94 | 6 | 0.4 | 14.9 | 94.5 | >380 |
| H08U-K | 92 | 8 | 0.4 | 14.7 | 93.2 | >380 |
| H12U | 88 | 12 | 0.4 | 14.3 | 92.5 | >350 |
| H10S | 90 | 10 | 0.6 | 14.4 | 92.1 | >350 |
| H10F | 90 | 10 | 0.8 | 14.4 | 91.8 | >350 |
| S1 | 88 | 12 | 0.6 | 14.2 | 11.2 | >380 |
Application
The Specification Range of extruded Grounded Tungsten Carbide Rod :
WC Grain size range: 0.3~0.5μ.m; 0.5~0.9μ.m; 1.0~1.3μ.m; 1.4~2.0μ.m.
Length range:3mm-600mm; (General Length: 100mm,300mm,320mm,330mm)
Diameter Grade: h4(H4), h5(H5), h6(H6), h7(H7), h8(H8), h9(H9), etc.
Good grinding machine to ensure the sphencity & the Linearity of rod at higher level standard;
Sphericity tolerance range: 0.001mm ~ 0.005mm;
Linearity tolerance range: 0.001mm~0.1mm;
Surface Roughness can be reached to: RA0.04.(reach a mirror effect surface after fine grinding)
| Sphericity tolerance & Circular run-out for Grounded Tungsten Carbide Rod : | |||
| Diameter | Surface Roughness | Sphericity | Circular run-out |
| 2--6 mm | RA0.04 | 0.001 | ↑0.1 |
| 6.5-10 mm | RA0.04 | 0.001 | ↑0.1 |
| 10.5-14 mm | RA0.04 | 0.002 | ↑0.1 |
| 14.5-20 mm | RA0.04 | 0.004 | ↑0.05 |
| >20 mm | RA0.04 | 0.005 | ↑0.03 |
| ISO 286-2 Carbide Round Bar Tolerances "h Series" in Millimeters : | ||||
| Diameter | h4 | h6 | h9 | h11 |
| 0-3.0mm | 0/-0.003 | 0/-0.006 | 0/-0.025 | 0/0.006 |
| 3.001-6.0mm | 0/-0.004 | 0/-0.008 | 0/-0.03 | 0/0.008 |
| 6.001-10.0mm | 0/-0.004 | 0/-0.009 | 0/-0.036 | 0/0.009 |
| 10.001-18.0mm | 0/-0.005 | 0/-0.011 | 0/-0.043 | 0/0.011 |
| 18.001-30.0mm | 0/-0.006 | 0/-0.013 | 0/-0.013 | 0/0.013 |
| 30.001-50.0mm | 0/-0.007 | 0/-0.016 | 0/-0.052 | 0/0.016 |
| 50.001-60.0mm | 0/-0.008 | 0/-0.019 | 0/-0.062 | 0/0.019 |
- Similar Products
$1.50
10 Pieces (MOQ)
Aluminium Wheel Machining Carbide Inserts Gdma840
Chengdu Youcut Tools Co., Ltd