Servo Molybdenum Wire EDM Metal Cutting Machine with ± 30° Taper

Expert-DF Series CNC EDM Wire Cutting Machine is equipped with servo automatic wire tightening device, no need for manual wire tightening. Maintaining a certain tension during the cutting process is necessary for ensuring the precision of taper cutting.
It adopts vertical high-rigidity large-taper head developed by independent innovation and research. The UV axis is imported linear guide rail, silent transmission design.

Features:
1. Supports automatic programming driven by graphics, no need to touch the code, just set the processing technology for the processing graphics, then processing can be carried out; at the same time, supports 3B code, G code and other processing codes generated by various wire cutting software;
2. Multiple processing methods can be flexibly combined for processing (continuous, single-stage, forward, reverse, backward, etc.)
3. XY Panasonic AC servo motor, UV axis can be set to commutation, drive motor can be set to five-phase ten-beat, three-phase six-beat, pulse drive and other modes;
4. Real-time monitoring of the X, Y, U, V four-axis processing status;
5. Processing preview, real-time display of processing progress; three-dimensional tracking display can be performed during taper processing, graphics can be enlarged and reduced to view, and processing conditions can be observed from multiple angles such as main view, left view, top view, etc.;
6. Multiple cutting can be performed to improve the finish.
7. With user-maintainable process library function, multiple processing becomes simple and reliable;
8. The processing of tapered workpieces adopts four-axis linkage control technology, which can easily process upper and lower special-shaped surfaces, making the processing of complex tapered graphics simple and accurate;
9. It can drive 4-axis motion control card, and the operation is stable and reliable;
10. It has automatic alarm function, which automatically alarms when the processing is completed or a fault occurs, and the alarm time can be set;
11. It supports corner clearing delay processing, and delays at the corners of the processing trajectory to improve the deviation caused by the bending of the electrode wire;
12. It supports three processing modes: ordinary fast wire mode, 3-bit coded medium wire, and medium wire oscillation output mode;
13. Automatically save the processing status when the power is off, resume processing when the power is on, and automatically retreat in case of short circuit;
14. Automatically shut down the machine power after processing.
15. The imperial coordinate position can be checked at any time during processing
16. Add secondary development software: large diameter taper processing programming software (diameter 0-9.999 meters)