$9000.00
1 Set (MOQ)
Wet Sand Rubber Wheel Wear Testing Machine
Jinan Liling Testing Machine Co., Ltd
Swipe or use the arrows to view product images.
Signal Lights Water Flush Resistance Tester for Digital Equipment, Communication, Vehicles, Lamps and Lanterns
| Price | $30000.00 |
|---|---|
| Min Order | 1 Set |
| Availability | In Stock |
| Shipping From | Guangdong, China |
| Popularity | 520 people viewed |
Model NO.:
YSRT-1000
After-sales Service:
Aviailable
Warranty:
12months
Max Diameter of Workpiece:
<500mm
Mass Scope of Workpiece:
<900kg
Type:
Signal Lights Water Flush Resistance Tester
Maxcapacity:
<1000KN
Accuracy Grade:
0.5
Load Way:
Electronic Load
Loading Method:
Dynamic Load
Display:
Digital
Control:
Manual Control
Weight:
100-500Kg
Power Source:
AC110V
Oil Cylinder Position:
N/a
Test Area Size W*H*D(Cm):
120*120*120
Exernal Chamber Size W*H*D(Cm):
165*220*380
Rain Drop Area(Ipx1~Ipx2):
80*80cm, 100*100cm
Swing Pipe Radius(Ipx3~Ipx4):
50cm
Rotary Table Diameter&Load:
80cm, 50kg
Rotating Speed of Rotary Table:
1~5r/Min, Ajustable
Internal Chamber Material:
SUS#304 Stainless Steel Plate
External Chamber Material:
Stainless Steel or Cold Rolled Plate
Other Components:
Indoor Light, Wiper, Caster Adjuster
Power Supply:
AC 3 Phase 380V 60/50Hz
Customization Service:
Non-Standard Requirement Is Available
Trademark:
Yuanyao
Transport Package:
Strong Wood Carton
Specification:
IEC60529
Origin:
China
HS Code:
8479899990
Product Description
Signal Lights Water Flush Resistance Tester For Digital equipmetn,communication,Vehicles.
Application:
Signal lights water flush resistance tester is based on protection grade ,simulates the outdoor raining climate to do the water proof performance test,determine the products reach the corresponding protection grade or not ,so that product design,research and development and factory inspection.It is mainly for electrical and electronics products,LED lighting products,lamps ,lanterns,electrical cabinet,communication ,digital equipment and vehicles.
Definition of IPX5:
Protected against water jets - Water projected at all angles through a 6.3mm nozzle at a flow rate of 12.5 liters/min at a pressure of 30kN/m2 for 3 minutes from a distance of 3 meters.
Feature:
1. Meet the requirement of IEC60529 standard IPX5 water pouring test and IPX6 water jet test.
2 Stainless steel materials.
3 Best after sales service: One year free parts maintenance.
4 Customization is available & welcomed.
5 Sample power on test
6IPX1~IPX6 test can be performed in one chamber
7 Water can be recycle
Specification:
Detailes:
Compamy profile
1.Do you offer after-sales service?
Every machine from our factory has a 12-month warranty after shipment. If your machine doesn't work, you can send E-mail to us and we will try our best to find the problem by email or skype video chat if necessary.
2.Do you accept customization service?
Yes, of course. We can not only offer standard machines, but also customized machines according to your requirements.
3.Do you accept customization service? Can I have my logo on the machine?
Yes, of course. We can not only offer standard machines, but also customized machines according to your requirements. And we can also put your logo on the machine.
4.Why choose Gangdong yuanyao ?
We are the factory with own team .we can provide you the reliable quality products while with reasonable price.
5.How about your packing and shipment
products wold be coverd with pe film then put them into the standard wooden case,By Sea or Air are available
Welcome to enquire and purchase!
Application:
Signal lights water flush resistance tester is based on protection grade ,simulates the outdoor raining climate to do the water proof performance test,determine the products reach the corresponding protection grade or not ,so that product design,research and development and factory inspection.It is mainly for electrical and electronics products,LED lighting products,lamps ,lanterns,electrical cabinet,communication ,digital equipment and vehicles.
Definition of IPX5:
Protected against water jets - Water projected at all angles through a 6.3mm nozzle at a flow rate of 12.5 liters/min at a pressure of 30kN/m2 for 3 minutes from a distance of 3 meters.
Feature:
1. Meet the requirement of IEC60529 standard IPX5 water pouring test and IPX6 water jet test.
2 Stainless steel materials.
3 Best after sales service: One year free parts maintenance.
4 Customization is available & welcomed.
5 Sample power on test
6IPX1~IPX6 test can be performed in one chamber
7 Water can be recycle
Specification:
| Model | YSRT-512 | YSRT-1000 | YSRT-1728 |
| Test zone size W*H*D(cm) | 80*80*80 | 100*100*100 | 120*120*120 |
| External chamber size WxHxD ( cm) | 125*180*340 | 145*200*360 | 165*220*380 |
| Rain drop area(IPX5-IPX6) | 60*60 cm | 60*60cm,80*80cm | 80 *80cm,100*100cm |
| Swing pipe radius(IPX3-IPX6) | 30cm | 40cm | 50cm |
| Rotary table siamtere&load | 50cm,50KG | 60cm,50KG | 80CM,50KG |
| Spray nozzie dimeter&jet distance(IPX5- IPX6) | 6.3mm(IPX5),1 2. 5mm(IPX6);2.5~3m | ||
| Water flow(IPX5-IPX6) | 1~1.5mm/min(IPX1),3 ~3.5mm/min(IPX2);1.1L/min(IPX3),1.8L/min(IPX4);12.5L±0.625Lmin(IPX5),100±5L/min(IPX6) | ||
| Rotating speed of rotary table | 1-5r/min ,Adjustable | ||
| Innernal chamber material | SUS#304 stailess steel plate | ||
| External chamber material | Clode rolled sheet +Power coating | ||
| other components | Indoor light ,wiper,caster adjuster | ||
| Power supply | AC3 phase 380V 60/50HZ | ||
| Customization | Non-standrad requipments is available | ||
Detailes:
Compamy profile
1.Do you offer after-sales service?
Every machine from our factory has a 12-month warranty after shipment. If your machine doesn't work, you can send E-mail to us and we will try our best to find the problem by email or skype video chat if necessary.
2.Do you accept customization service?
Yes, of course. We can not only offer standard machines, but also customized machines according to your requirements.
3.Do you accept customization service? Can I have my logo on the machine?
Yes, of course. We can not only offer standard machines, but also customized machines according to your requirements. And we can also put your logo on the machine.
4.Why choose Gangdong yuanyao ?
We are the factory with own team .we can provide you the reliable quality products while with reasonable price.
5.How about your packing and shipment
products wold be coverd with pe film then put them into the standard wooden case,By Sea or Air are available
Welcome to enquire and purchase!
- Similar Products
$5100.00
1 Piece (MOQ)
Gw-H40 Hydraulic Bending and Re-Bending Testing Machine
Jinan Hensgrand Instrument Co., Ltd.
$6000.00
1 Piece (MOQ)
Factory Price High Speed Shock Test Systems Safety Equipments
Jinan Xinghua Instruments Co., Ltd.