Menu
Global B2B sourcing platform
Verified suppliers and manufacturers

Silicone Cold Shrink Tubing for Antenna 1/2 Coaxial Cable 7/16 DIN 4.3-10 Connector

Price $0.10
Min Order 1 Piece
Availability In Stock
Shipping From Fujian, China
Popularity 506 people viewed
Model NO.:
CST/CPS
Application:
RF Coaxial Connectors Weatherproofing
Color:
Black or Gray
Connector Type:
DIN, N and Mini DIN
Cable Type:
Coaxial Cable and Power Cable
Sealing Class:
IP68
Logo Printing:
Available
Trademark:
HarshSeal
Transport Package:
Standard Package
Specification:
CST12
Origin:
China
HS Code:
8547200000
Product Description
Cold Shrink Tubing Coax Connector Sealing Kits CST12 Series
Product Description

 

CST12 series provide the correct Cold Shrink Tubing or the correct Cold Shrink Tubing and special foam to make the installation of coax connector seals easy. The installation does not require tooling, and the quality of the installation is less installer dependent.
 
Application

 


The main application is the sealing of coax connectors used in the wireless communication antenna market. These mainly outside installed connectors require an extra sealing. 
 
Technical Information

 

The outer Cold Shrink Tubing is made from UV resistant EPDM or Silicone rubber material to provide an excellent seal on the connector. In cases where the different coax cable diameter can not be covered with the tube application range, a special foam is used to increase the smallest cable diameter to fit the shrink performance of the Cold Shrink tube.
 
Selection Table

 

Part#Supported Coax SizesMaterialApplication RangeConnectors Type
CST12D  1/2" Jumper Cable to Antenna Connections, 1/2" Cable to 1/2" Cable ConnectionsSilicone Rubber / EPDM Rubber      13 - 39
 
7/16 DIN, N type & Mini Din 4.3-10 & 4.1-9.5
CST12MD1/2" Jumper Cable to Antenna Connections, 1/2" Cable to 1/2" Cable ConnectionSilicone Rubber/ EPDM Rubber       13 - 27Mini Din 4.3-10 & 4.1-9.5
CST1278MN½" Jumper Cable to 7/8" Feeder Cable Connection,
5/8"Cable  to 7/8" Cable Connections

 
EPDM Rubber       13 - 49   7/16 DIN & N Type
CST12158MN1/2" Jumper Cable to 1-1/4" or 1-5/8" Feeder Cable Connections
5/8" Jumper Cable to 1-1/4" or 1-5/8" Feeder Cable Connections
EPDM Rubber       13 - 67.87/16 DIN & N Type
 
Typical Properties

 

EPDM Rubber
PropertiesTypical DataTest Method
300% Modulus4.7Mpa ASTM D 412-75
Ultimate Tensile Strength11.8 MPaASTM D 412-75
Utimate Elongation750%ASTM D 412-75
Tear Strength38.6N/mmASTM D624C-73
Dielectric Strength19.1KV/mmASTM D149-75
Moisture AbsorptionWeight gain 1.8%7 days, 90°C, HO
UV Resistance2,000hrs, UVB-313 fluorescent lamp, exposureASTM G-53
 
Silicone Rubber
PropertiesTypical DataTest Method
Hardness49 Shore AASTM D2240
Tensile Strength11.8 MPaASTM D 412-75
Elongation at Break641%ASTM D 412-75
Tear Strength38.6N/mmASTM D624B
Dielectric Strength19.1KV/mmASTM D149
Specific Gravity1.23/
 
Detailed Photos


 

Packaging & Shipping

 

Production

  • Similar Products
Full Page Contact Supplier