Ss Flanged Pneumatic Angle Seat Valve Dn50 Pn25

SS Flanged Pneumatic Angle Seat Valve DN50 PN25

1). Nominal Diameter: DN15-DN100
2). Pressure Range: 0-1.6Mpa
3). Medium Temp.: -10°C~+180°C
4). Ambient Temp.: -10°C~+60°C
5). Operating Pressure: 3-8bar
6). Valve Body Material: Stainless Steel, CF8/304,CF8M/316
7). Sealing Material: PTFE
8). Actuator Material: Plastic, Stainless Steel, CF8/304, CF8M/316
9). Medium: Neutral Gas, Air, Water, Vapor
10). Connection: Flanged, Clamped, Welding, Thread (BSP, BSPT, NPT)
11). Type: Double-acting, Single-acting, Water-proof Hammer

Option: Manual Position-Limit Actuator

This kind of actuator can adjust the piston opening, limit travel and adjusts the valve flow. It is applicable to all types of angle seat valve and also used for emergency brake when air supply is failed or mechanical (solenoid) failure occurs.